Good advice can only be given by a truly disinterested person.
02141 Ukraine, Kiev, st. Rudenko, 6a, office 819
tel.: 067-2-316-316; 044-536-4-666
tel.: multichannel 091 48-10-416
admin@inconsulting.com.ua

Fuel oil expertise

1 1 1 1 1 Rating 5.00 (1 Vote)

Fuel oil is derived from oil refined products. It is widely used as fuel for boiler houses (from standard to naval), and is in demand in agriculture.

There are fundamental indicators of fuel that characterize its quality. Density is considered one of these parameters. At a temperature of +20 degrees Celsius, the density can range from 950 to 1015 kilograms per cubic meter. The next important parameter is viscosity. It determines the possibility of delivering fuel and the specifics of its supply to the furnaces. Another important parameter is the flash point. It is necessary to establish the fire safety threshold for fuel oil and the conditions for its storage.

Ash content is determined by the technology of refining the oil itself, and depends on the concentration of salts and the presence of mechanical impurities in the composition. Based on the technology for extracting fuel oil, there should be no water in its composition. Its presence indicates improper transportation of raw materials (unintentional heating or delivery in unsuitable containers). Water should not be present in the composition, since it inherently does not have any beneficial effect.

General indicators and standards for fuels and lubricants

Service (for 1 sample) Deadlines Price without VAT*
Aniline point (GOST 12329) up to 16 days 56 USD
Phosphorus content (GOST 9827, ASTM D 6481, ASTM D 6443, ASTM D 4927) up to 16 days 51 USD
Induction period (GOST 4039) up to 16 days 160 USD
Cloud point (GOST 5066, DSTU ISO 3015) up to 16 days 81 USD
Drop point (GOST 6793, GOST 19832, GOST 7171) up to 16 days 56 USD
Volume fraction of methyl/ethylated fatty acid esters (DSTU EN 14078) up to 16 days 70 USD
Crystallization start temperature (GOST 5066, DSTU ISO 3013, GOST 18995.5) up to 16 days 81 USD
Initial boiling point (GOST 2177) up to 7 days 65 USD
Saturated steam pressure (DSTU 4160, GOST 1756) up to 16 days 53 USD
Iodine number (GOST 2070) up to 9 days 53 USD
Viscosity index, calculation (DSTU GOST 25371, GOST 6794) up to 7 days 21 USD
Conditional viscosity (GOST 6258) up to 9 days 40 USD
Content of free acids (GOST 6707) up to 16 days 44 USD
Content of water-soluble acids and alkalis (GOST 6307) up to 16 days 44 USD
Dynamic viscosity (GOST 1929) up to 9 days 56 USD
Acid number (GOST 11362, ASTM D 974) up to 9 days 51 USD
Acidity (GOST 5985-79) up to 9 days 51 USD
The concentration of actual resins (GOST 8489, DSTU GOST 1567, GOST 1012) up to 16 days 67 USD
Filterability coefficient (GOST 19006-73) up to 16 days 40 USD
The presence of water and mechanical impurities (qualitatively) up to 5 days 23 USD
Coking capacity (GOST 19932, GOST 14298) up to 16 days 56 USD
Color (GOST 20284, GOST 3134, GOST 1012, ND) up to 16 days 30 USD
Lead concentration (GOST 28828, GOST 1012) up to 7 days 44 USD
Chemical composition of carbohydrates (aromatic, olefinic, etc.) (DSTU 7686, ASTM D 6733, GOST 29040) up to 16 days 95 USD
Base number (DSTU 5094, GOST 11362) up to 9 days 56 USD
Mass fraction of sulfur (DSTU ISO 20847, ISO 13032, ASTM D 4294, DSTU EN ISO 20884, ASTM D 2622, GOST 19121) up to 7 days 44 USD
Knock resistance, octane number (OC) according to the research method (GOST 8226, DSTU 8737) up to 16 days 91 USD
Pour point (GOST 20287) up to 16 days 81 USD
Oil volatility according to NOACK (GOST 32334) up to 16 days 95 USD
Mass fraction of hydrogen sulfide (GOST 17323) up to 16 days 56 USD
Mass fraction of ash up to 9 days 81 USD
Mass fraction of mercaptan sulfur (GOST 17323, DSTU ISO 3012) up to 16 days 56 USD
Mass fraction of polycyclic aromatic hydrocarbons (DSTU EN 12916) up to 16 days 72 USD
Volume fraction of benzene and aromatic hydrocarbons (GOST 29040, ASTM D 6733) up to 16 days 81 USD
Mass fraction of oxygen (DSTU EN 12177, DSTU EN 13132) up to 16 days 98 USD
The content of benzene and aromatic hydrocarbons (GOST 29040, EN 238-96) up to 16 days 81 USD
Mass fraction of manganese up to 16 days 105 USD
Density (DSTU GOST 31072, DSTU GOST 8.559, ASTM D 1298, GOST 3900, ДСТУ EN ISO 3675) up to 5 days 60 USD
Appearance (GOST 6794, GOST 10877, GOST 1033, etc.) up to 5 days 30 USD
Ash content (GOST 1461, DSTU EN ISO 6245, DSTU GOST 12417, GOST 23652, GOST 10877) up to 16 days 81 USD
Sulfate ash content (DSTU GOST 12417, DSTU ISO 3987) up to 16 days 81 USD
Period of stability (GOST 6321) up to 16 days 53 USD
Hydrogen ion activity indicator up to 9 days 74 USD
Refractive index (DSTU GOST 18995.2) up to 16 days 44 USD
Transparency (GOST 32, GOST 982, GOST 9972, GOST 10121, GOST 10289) up to 16 days 35 USD
Degree of purity (GOST 12275) up to 16 days 107 USD
Boiling point (ND) up to 7 days 65 USD
Flash point in a closed crucible (GOST 6356, DSTU ISO 2719) up to 7 days 74 USD
Maximum filterability temperature (GOST 22254, GOST 322254, DSTU EN 116) up to 16 days 67 USD
Knock resistance, octane number (OC) according to the motor method (GOST 511, DSTU 8736) up to 16 days 91 USD
Calorific value (GOST 11065) up to 16 days 44 USD
Cetane number (GOST 3122, DSTU 8735) up to 7 days 67 USD
Fractional composition (GOST 2177, ISO 3405, GOST 28084) up to 7 days 65 USD
Flash point in an open crucible (DSTU GOST 4333, ISO 2592) up to 7 days 74 USD
Temperature limits of distillation (GOST 28084) up to 9 days 65 USD
Saponification number (GOST 21749) up to 16 days 79 USD
Cetane index (calculation, GOST 27768, DSTU ISO 4264) up to 5 days 28 USD
Vapor lock index up to 16 days 30 USD
Mass fraction of elements up to 7 days 44 USD
Mass fraction of iron (GOST R 52530-2006) up to 16 days 56 USD
Mass fraction of mechanical impurities (DSTU EN ISO 12662, GOST 10577, GOST 6479, GOST 6370) up to 7 days 107 USD
Volume fraction of oxygen compounds (DSTU EN 12177, DSTU EN 13132) up to 16 days 98 USD
Volume fraction of olefins (ASTM D 6733) up to 16 days 95 USD
Hydrogen index (GOST 11362, ND) up to 9 days 74 USD
Kinematic viscosity (DSTU GOST 33, ASTM D 445, EN ISO 3104, one viscometer) up to 7 days 81 USD
Mass fraction of alkali (GOST 6307, GOST 9433, GOST 19337) up to 16 days 44 USD
Alkalinity (GOST 28084) up to 9 days 47 USD
Mass fraction of aromatic hydrocarbons (GOST 6994) up to 16 days 51 USD
Mass fraction of active elements (GOST 13538, ASTM D 6481, ASTM D 6443, ASTM D 4927) up to 7 days 44 USD
Copper plate test (DSTU EN ISO 2160, GOST 6321, ГОСТ 2917) up to 7 days 53 USD
Penetration (GOST 5346, GOST 8551, GOST 19832, GOST 19337, etc.) up to 16 days 56 USD
Mass fraction of water (DSTU GOST 2477, ASTM D 95, GOST 1547, GOST 14870) up to 7 days 58 USD
Thermal stability under static conditions (GOST 11802) up to 16 days 56 USD
Interaction with water (GOST 27154, DSTU ISO 6250) up to 16 days 35 USD
Height of non-smoking flame (GOST 4338, DSTU ISO 3014) up to 16 days 56 USD
Electrical conductivity (GOST 25950, DSTU 8385) up to 16 days 35 USD
Contentse soaps of naphthenic acids (GOST 21103) up to 16 days 51 USD
Tribological characteristics (GOST 9490) up to 16 days 309 USD
Thermal and oxidative stability (GOST 23175, EN ISO 12205, ASTM D 2274) up to 16 days 126 USD
Lubricity (EN ISO 12156-1, DSTU ISO 12156-1) up to 16 days 309 USD
Bully index (GOST 9490) up to 16 days 128 USD
Critical load (GOST 9490) up to 16 days 60 USD
Wear diameter (GOST 9490) up to 16 days 88 USD
Welding loads (GOST 9490) up to 16 days 100 USD
Low temperature studies, down to -60 °C, 1 hour. up to 4 days 40 USD
Low temperature studies, down to -89 °C, 1 hour. up to 4 days 44 USD

The prices are approved by the director of LLC "In Consulting" 29.11.2024. Deadlines are indicated in working days

For a free consultation, you can use On-line consultation, or call us or write to the messengers.For information about the cost of services go to Tariffs or place Application for Services.