Along with cargo insurance, the involvement of an independent expert at key stages of the supply chain, who is able to inspect and assess the required object (cargo, vehicle, etc.), helps to minimize losses. Such a third party is a specialized organization - a surveyor.
The surveyor's report is accepted in the court or the insurance company as an expert opinion in determining the circumstances associated with damage, spoilage or theft of cargo.
Our company is engaged in the provision of professional independent survey services. Certified specialists of the company assess the quality at different stages of transportation of food, bulk, hazardous, construction, liquid and other goods, provide the following types of services:
- inspection of the quality of goods at the manufacturing enterprise;
- pre loading inspection;
- control of the loading process;
- presence of a surveyor during cargo inspection (veterinary, quarantine, customs);
- surveyor inspection during container transshipment (unloading);
- surveyor inspection at the warehouse;
- technical examination of freight vehicles, containers, wagons;
- examination of damage and loss of cargo.
- The company's specialist collects and analyzes the necessary information, submits a survey report on the inspection.
Survey report - a document that is drawn up after a surveyor inspection of an object (container, car, cargo, etc.). The survey report includes: a description of the object being inspected, the circumstances under which the surveyor inspection was carried out (place, time of inspection, noticed inconsistencies, etc.), as well as conclusions regarding the state of this object at the time of the surveyor inspection. In addition to the survey report, calculations, photographs, video recordings, results of laboratory tests or other tests may be attached. This document is certified by the signature of the surveyor responsible for its preparation, as well as the seal of the survey company.
The cost of survey services depends on the location of the inspection, its type, methods of expert research, and a number of other factors.
We organize the following types of survey services:
Inspection of the quality of goods at the manufacturing enterprise (cargo survey)
- determination of the quality and quantity of material going into production;
- coordination with the client of control samples of the goods;
- control over the observance of proper conditions of storage of goods before shipment;
- quality control of packaging and correct labeling of goods.
Pre loading inspection (cargo survey)
Inspection of cargo before shipment to the consignee (before loading into a container, car, wagon, etc.):
- inspection of the condition of the cargo;
- photographing the cargo;
- checking the labeling and quality of cargo packaging;
- partial opening of the package and taking samples to check the quality of the shipped goods;
- verification of transport and shipping documents;
- recalculation of cargo (tally account) inspection of the cargo container, checking the technical condition of the vehicle;
- photographing the container.
Control of the loading process (cargo survey):
- photographing the loading process;
- control of the correctness of stowage, placement, fastening of goods.
The presence of a surveyor during inspection (inspection) of cargo (veterinary, quarantine, customs):
- photographing the container arrived for inspection;
- control of the integrity of seals and locking devices;
- photographing the stowage of cargo before and after the inspection;
- supervision over the process of the search;
- photographing and control of the process of taking cargo samples;
- sealing and photographing a closed container.
Survey inspection during container transshipment (unloading):
- verification of sealing devices and checking the integrity of seals;
- photographing the fasteners and locking devices of the container;
- photographing the stowage of cargo;
- control of the transshipment process or control at unloading;
- photographing an empty container;
- recalculation of cargo;
- cargo quality inspection, cargo weighing;
- verification of cargo marking and verification with documents.
Survey inspection at the warehouse:
- examination of the quality of the goods;
- inventory of goods in the warehouse;
- survey of contamination or damage to cargo arising during its storage in a warehouse, cargo work or transportation;
- determination of the degree of damage to cargo, classification of cargo by visual condition, damage;
- control of the processes of unloading goods to a warehouse, loading into a container, a / m;
- weighing the cargo;
- checking the marking and packaging of the cargo;
- checking the conditions of cargo storage;
- Provision of a surveyor report on the conducted surveyor inspection.
Examination of damage and loss of cargo
- determination of the degree of damage to cargo and the amount of damaged cargo (during transportation, loading and unloading operations, etc.);
- determination of the percentage of substandard goods from the entire delivery lot;
- survey of improper storage or transportation conditions of cargo;
- confirmation of incorrect stowage of cargo;
- calculation of the shortage;
- identification and recommendations for eliminating the causes of damage or loss of cargo;
- establishment of the fact of cargo theft;
- assistance in the investigation of insured events and settlement of customer losses.
We will be glad to answer your questions regarding the organization of survey services and provide additional information!
Commodity expertise
| Service (for 1 sample) | Deadlines | Price without VAT* |
| Commodity expertise (for 1 question) | up to 14 days | 121 USD |
| Consumer law advice | 1 hour | 60 USD |
| Examination of clothes and shoes | ||
| Examination of clothes, textiles and fabrics (for 1 question) | up to 14 days | 121 USD |
| Fiber composition identification (FTIR + DCS + microscopy + qualitative reactions) | up to 14 days | 437 USD |
| Quantitative analysis of the fibrous composition (DSTU 4057, per 1 component) | up to 7 days | 153 USD |
| Fabric density (ISO 7211-6:2007, GOST 3811, EN 29073-1, EN 14970) | up to 3 days | 56 USD |
| Examination of leather, fur and things from them (for 1 question) | up to 14 days | 121 USD |
| Shoe expertise (for 1 question) | up to 14 days | 121 USD |
| Food Examination | ||
| Milk | ||
| Purity of milk fat (DSTU ISO 17678) | up to 21 days | 433 USD |
| Content of pesticides (HPLC or GC) | up to 21 days | 433 USD |
| Honey, sugar, molasses, wine | ||
| Sucrose in liquid, degrees Brix | up to 7 days | 100 USD |
| Moisture content of honey | up to 7 days | 53 USD |
| Compound feed, cake, meal | ||
| Mass fraction of moisture and volatile substances (GOST 13979.1, accelerated) | up to 5 days | 65 USD |
| Mass fraction of fat (GOST 13496.15) | up to 14 days | 88 USD |
| Mass fraction of ash | up to 14 days | 74 USD |
| Mass fraction of crude protein (by nitrogen) | up to 14 days | 84 USD |
| Mass fraction of crude fiber | up to 14 days | 67 USD |
| Presence of genetically modified organisms (GMO) in products | up to 14 days | 181 USD |
| Vegetable oil, fat | ||
| Content of phosphorus, sulfur, magnesium, calcium, zinc, barium (XRF) | up to 4 days | 51 USD |
| Fatty acid composition (GOST 30418, ISO 5508, GC-MS) | up to 14 days | 353 USD |
| Acid number (DSTU 4350, EN ISO 660) | up to 7 days | 153 USD |
| Peroxide number (GOST 26593, DSTU EN ISO 3960) | up to 7 days | 153 USD |
| Mechanical impurities (DSTU 5063, EN ISO 663) | up to 5 days | 128 USD |
| Saponification number (DSTU ISO 3657, DSTU 4604) | up to 7 days | 153 USD |
| Content of moisture and volatile substances (DSTU ISO 662) | up to 5 days | 91 USD |
| Seeds (DSTU 7011) | ||
| Humidity (GOST 10856) | up to 5 days | 65 USD |
| Mass fraction of oil (GOST 10857) | up to 14 days | 88 USD |
| Mass fraction of crude protein (GOST 13496.4) | up to 14 days | 84 USD |
| Mass fraction of oleic acid (GOST 28238) | up to 14 days | 88 USD |
| Oil acid number (GOST 10858) | up to 7 days | 60 USD |
| Oil admixture, Garbage admixture, Infestation with grain pests | up to 14 days | 121 USD |
| Weight of 1000 seeds | up to 3 days | 72 USD |
| Toxic elements (lead, cadmium, arsenic, mercury, copper, zinc) | up to 14 days | 223 USD |
| Content of heavy metals (lead, cadmium, MUK 4.1.986-00) | up to 14 days | 79 USD |
| GMO (DSTU ISO 21569) | up to 14 days | 133 USD |
| Mycotoxins (aflatoxin B1, zearalenone, T-2 toxin) | up to 24 days | 433 USD |
| Aflatoxins (MR 4082-86) | up to 14 days | 81 USD |
| Radionuclides (MVI.MN 1181-2013) | up to 14 days | 88 USD |
| Pesticides (DSTU EN 12393) | up to 14 days | 244 USD |
| Alkaloids of beetles and hornets (garbage admixture, GOST 30483) | up to 14 days | 58 USD |
| Flour | ||
| Humidity (DSTU ISO 712) | up to 7 days | 91 USD |
| Ash content (550 °С, DSTU ISO 2171) | up to 7 days | 79 USD |
| Ethyl alcohol, alcoholic beverages, water-alcohol solutions | ||
| Alcohol content (aerometric method DSTU 4181) | up to 3 days | 77 USD |
| Purity test (DSTU 4181) | up to 3 days | 35 USD |
| Oxidability test (DSTU 4181) | up to 7 days | 153 USD |
Mass concentration of aldehydes and clove oil (DSTU 4222)  |
up to 14 days | 353 USD |
| Volumetric concentration of methyl alcohol (DSTU 4181) |
up to 14 days | 240 USD |
| Salt (DSTU 3583, DSTU 4246) | ||
| Appearance, color, taste, smell (DSTU 4886.2) | up to 3 days | 35 USD |
| Mass fraction of sodium chloride (DSTU 4886.5) | up to 7 days | 153 USD |
| Calcium ion mass fraction (DSTU 4886.6) | up to 7 days | 153 USD |
| Mass fraction of magnesium ion (DSTU 4886.6) | up to 7 days | 153 USD |
| Mass fraction of sulfate ion (DSTU 4886.7) | up to 7 days | 153 USD |
| Mass fraction of potassium ion (DSTU 4886.8) | up to 7 days | 153 USD |
| Mass fraction of iron (III) oxide (DSTU 4886.13) | up to 7 days | 153 USD |
| Mass fraction of water-insoluble residue (DSTU 4886.4) | up to 5 days | 128 USD |
| Mass fraction of moisture (DSTU 4886.3) | up to 5 days | 65 USD |
| Mass fraction of iodine (DSTU 4886.9) | up to 14 days | 316 USD |
| Mass fraction of ferrous potassium (DSTU 4886.12) | up to 7 days | 153 USD |
| pH of the solution | up to 3 days | 86 USD |
| Particle size (2 sieves, DSTU 4886.20) | up to 7 days | 49 USD |
| Toxic elements - mercury (GOST 26927) | up to 14 days | 316 USD |
| Toxic elements - arsenic (GOST 26930) | up to 14 days | 316 USD |
| Toxic elements - copper (GOST 26931 or GOST 30178) | up to 14 days | 223 USD |
| Toxic elements - lead (GOST 26932 or GOST 30178) | up to 14 days | 223 USD |
| Toxic elements - cadmium (GOST 26933 or GOST 30178) | up to 14 days | 223 USD |
| Toxic elements - zinc (GOST 26934 or GOST 30178) | up to 14 days | 223 USD |
| Water analysis | ||
| pH (reaction of the environment) | up to 3 days | 86 USD |
| Electrical conductivity | up to 3 days | 77 USD |
| Oxygen content in water | up to 3 days | 77 USD |
| Oxidation-reduction potential (ORP, redox, Eh) | up to 3 days | 84 USD |
| Water temperature | up to 3 days | 47 USD |
| Total mineralization (dry residue) | up to 3 days | 86 USD |
| Content of elements: iron (total), chromium (total), zinc, copper, nickel, cadmium, aluminum, lead, silver | up to 21 days | 223 USD |
| Air analysis | ||
| Oxygen content in the air (0-30%) | up to 2 days | 47 USD |
| Carbon monoxide content in the air (carbon monoxide, CO, 0-1000 ppm) | up to 2 days | 47 USD |
| Hydrogen sulfide content in the air (H2S, 0-100 ppm) | up to 2 days | 47 USD |
| Combustible gases content in the air (LEL, 0-100 %) | up to 2 days | 47 USD |
| Analysis of the working area air with indicator tubes (for 1 room) | up to 2 days | from 47 USD |
| Express air analysis for gasoline (for 1 room) | up to 2 days | 53 USD |
| Express air analysis for xylene (for 1 room) | up to 2 days | 53 USD |
| Express air analysis for carbon monoxide (for 1 room) | up to 2 days | 53 USD |
| Express air analysis for nitrogen oxides (for 1 room) | up to 2 days | 53 USD |
| Express air analysis for toluene (for 1 room) | up to 2 days | 53 USD |
| Express air analysis for chlorine (for 1 room) | up to 2 days | 53 USD |
| Air temperature | up to 2 days | 47 USD |
| Air humidity | up to 2 days | 47 USD |
| Air movement | up to 2 days | 47 USD |
| Radiation background of the room | up to 1 day | 42 USD |
| Level of lighting in the room | up to 2 days | 40 USD |
| Fertilizer analysis | ||
| Mass fraction of total nitrogen (Devard method) | up to 14 days | 107 USD |
| Mass fraction of ammonium nitrogen | up to 14 days | 98 USD |
| Mass fraction of nitrate nitrogen | up to 14 days | 98 USD |
| Mass fraction of amide nitrogen | up to 14 days | 98 USD |
| Mass fraction of biuret | up to 14 days | 98 USD |
| Mass fraction of nitrogen (ammonium, amide, nitrate, total) | up to 14 days | 172 USD |
| Fertilizers: humic acids | ||
| Moisture and dry residue (GOST 26713) | up to 7 days | 116 USD |
| Ash (GOST 26714) | up to 7 days | 79 USD |
| Content of humic acids (DSTU 7083) | up to 14 days | 407 USD |
| Content of free humic acids (DSTU 7083) | up to 14 days | 386 USD |
| Content of fulvic acids (DSTU 7083) | up to 28 days | 791 USD |
| Examination of building materials | ||
| Sand | ||
| Content of SiO2, SO3, Fe2O3, Al2O3, Cr2O3, TiO2, CaO (XRF) | up to 4 days | 102 USD |
| Content of SiO2, SO3, Fe2O3, Al2O3, Cr2O3, TiO2, CaO (ICPE) | up to 14 days | 223 USD |
| Free quartz content (DSTU B V.2.7-32 95) | up to 14 days | 316 USD |
| Content of sulfur compounds (GOST 19609.5) | up to 7 days | 153 USD |
| Total alkali content (GOST 19609.6, ICPE) | up to 14 days | 223 USD |
| The content of dust and clay particles (DSTU B V.2.7-232) | up to 7 days | 223 USD |
| Presence of organic impurities (DSTU B V.2.7-232) | up to 7 days | 153 USD |
| The content of harmful impurities | up to 3 days | 35 USD |
| Content of silicon oxide (SiO2) (DSTU B B.2.7-131) | up to 7 days | 153 USD |
| Iron oxide content (Fe2O3) (DSTU B B.2.7-131) | up to 14 days | 316 USD |
| Aluminum oxide content (Al2O3) (DSTU B B.2.7-131) | up to 14 days | 316 USD |
| Content of chromium oxide (Cr2O3) (DSTU B B.2.7-131) | up to 14 days | 316 USD |
| Metallic iron content (DSTU B V.2.7-131) | up to 14 days | 316 USD |
| Content of titanium oxide (TiО2) (DSTU B V.2.7-131) | up to 14 days | 316 USD |
| The content of calcium oxide (CaO) (DSTU B B.2.7-131) | up to 14 days | 316 USD |
| Humidity (DSTU B V.2.7-131) | up to 7 days | 91 USD |
| Granulometric composition (1 sieve, DSTU B V.2.7-131) | up to 7 days | 53 USD |
| Loss of mass during roasting (DSTU B V.2.7-131) | up to 7 days | 98 USD |
| The reaction of the water hood | up to 3 days | 86 USD |
| Grain composition and grain size module (DSTU B V.2.7-232) | up to 7 days | 93 USD |
| Bulk density and hollowness (DSTU B V.2.7-232) | up to 3 days | 42 USD |
| Fly ash (DSTU B V.2.7-205:2009) | ||
| Content of calcium oxide (CaO) | up to 14 days | 51 USD |
| Magnesium oxide content (MgO) | up to 14 days | 51 USD |
| The content of sulfur and sulfate compounds in terms of SO3 | up to 14 days | 51 USD |
| The content of alkali oxides in terms of Na2O | up to 14 days | 51 USD |
| The content of calcium oxide, magnesium oxide, sulfur | up to 14 days | 72 USD |
| Ash moisture | up to 7 days | 91 USD |
| Loss on ignition (p.p.p.) | up to 7 days | 98 USD |
| Ash fusibility determination (GOST 32978-2014, ISO 540:2008) | up to 7 days | 302 USD |
| Residue on sieve N008 | up to 7 days | 53 USD |
| Specific total activity efficiency of natural radionuclides | up to 14 days | 200 USD |
| Mineral wool (DSTU B V.2.7-318, GOST 4640-93) | ||
| Content of SiO2, Al2O3, СаО, MgO (XRF) | up to 4 days | 102 USD |
| Content of organic substances (DSTU B V.2.7-38, GOST 17171) | up to 7 days | 98 USD |
| Humidity (DSTU B V.2.7-38, GOST 17171) | up to 5 days | 91 USD |
| Polymer expertise | ||
| Determination of the type of polymer (plastic), IR spectrometry | up to 14 days | 214 USD |
| Determination of polymer variety DSC analysis | up to 14 days | 112 USD |
| Determination of the quantitative and qualitative composition of the filler, XRF + gravimetry | up to 11 days | 147 USD |
| Polymer Shore hardness (EN ISO 868) | up to 5 days | 58 USD |
| Density polymer (GOST 15139, ISO 1183-1) | up to 3 days | 56 USD |
| Testing of polymers by artificial accelerated weathering (DSTU EN ISO 4892-3 , 500 hours) | up to 30 days | 5742 USD |
| Rubber expertise | ||
| The state of the liquid after exposure at -40 °C | up to 14 days | 374 USD |
| Resistance to aggressive environments (GOST 9.030) | up to 14 days | 395 USD |
| Corrosion of metals | up to 14 days | 365 USD |
| Density rubber (GOST 267, hydrostatics) | up to 3 days | 56 USD |
| Rubber Shore hardness (EN ISO 868) | up to 5 days | 58 USD |
| Compatibility with water -40 °C | up to 14 days | 93 USD |
| Compatibility with water 60 °C | up to 14 days | 107 USD |
The prices are approved by the director of LLC "In Consulting" 15.01.2025. Deadlines are indicated in working days
Field research fees
| Service (for 1 sample) | Deadlines | Price without VAT* |
| Departure of an expert in Kyiv (1 day, excluding the cost of expertise and other work) | up to 1 day | 81 USD |
| Departure of an expert in the Kyiv region (up to 1 day, up to 30 km, excluding the cost of examination and other work) | up to 1 day | 160 USD |
| Departure of an expert in Ukraine (up to 2 days, excluding the cost of expertise and other work) | up to 2 days | 321 USD |
| Departure of an expert in Ukraine for an additional day (1 day, excluding the cost of expertise and other work) | up to 1 day | 81 USD |
| Transportation costs (by the customer or in both directions upon the fact) | per 1 km | 0 USD |
| Meals and accommodation (if the departure is more than 1 day) | - | in fact |
| Performing work using a mounting belt | - | x1.25 |
| Carrying out work with large parts | - | x1.25 |
| Performance of work in closed vessels, apparatuses, tanks | - | x2.00 |
| Performance of work in existing industries with harmful working conditions | - | x1.25 |
| Performing work in a cramped position (at a height, in recesses) | - | x1.10 |
| Working with equipment with plaque (increased corrosion, dirt) over 3 mm | - | x1.20 |
| Performing work in overalls, with ventilation or the use of chemicals. reagents, in a hose gas mask | - | x1.30 |
| Performance of work on lifting machines with a span of more than 5 m, for every 5 m | - | x1.05 |
| Performing work on the boom of a tower crane with a lattice structure | - | x1.10 |
| The air temperature at the workplace is less than 0°C, for every 10°C | - | x1.05 |
The prices are approved by the director of LLC "In Consulting" 15.01.2025. Deadlines are indicated in working days
General rates for studies
| Service (for 1 sample) | Deadlines | Price without VAT* |
| Urgent expertise | term x0.5 | x2 |
| Work after hours (from 18:00 to 10:00, weekends, holidays) | standard | x2 |
| Prices for legal entities (payment by bank transfer, execution of an agreement, certificate of completion, tax invoice) | standard | x1.2 |
| Oral consultations (per 1 hour) | - | 60 USD |
| Written consultations (for 1 question) | - | 60 USD |
| General sampling (for 1 batch) | - | 49 USD |
| General sample preparation | - | 28 USD |
| Additional sample storage | 30 days | 7 USD |
| Oral/preliminary conclusion | - | x0.5 |
| Issuance of an expert opinion (for 1 question) | up to 7 days | 42 USD |
| Issuance of a complex expert opinion (for 1 question) | up to 14 days | 84 USD |
| Additional issuance of a conclusion in English (for 1800 characters with spaces) | up to 7 days | 19 USD |
| Issuance of a duplicate of an expert opinion or protocol (only to the research customer) |
up to 14 days | 23 USD |
| Issuance of a copy of the expert opinion or protocol (only to the research customer) |
up to 14 days | for free |
| Technical analysis of standards, GOSTs, TU | up to 14 days | 42 USD |
| Security and escort of valuables (1 hour) | 1 hour | 91 USD |
| Legal support | - | 642 USD |
| Preliminary consultations | - | for free |
| Analysis of standard samples | - | for free |
| Demo analyzes | - | for free |
| Discounts | ||
| Examination of samples of the same type from 5 pcs | - | -5-50% |
The prices are approved by the director of LLC "In Consulting" 15.01.2025. Deadlines are indicated in working days
For a free consultation, you can use On-line consultation, or call us or write to the messengers.For information about the cost of services go to Tariffs or place Application for Services.
Application template
