- GOST 10006-80 metal pipes. Test method for stretching.
- GOST 10025-78 rods tin-phosphor bronze. specifications
- GOST 10051-75 Covered electrodes for manual arc welding surface layers with special properties. Types.
- GOST 10052-75 Covered electrodes for manual arc welding of high-alloy steels with special properties. types
- GOST 10092-2006 cupronickel tubes for heat exchangers. specifications
- GOST 10096-76 Aluminum powder komkovannaya. Technical conditions.
- GOST 10145-81 Metals. Test method for long-term strength.
- GOST 10155-75 Wire Manganin uninsulated. specifications
- GOST 10160-75 Alloys precision soft-magnetic. specifications
- GOST 1018-77 aluminum tape, copper, brass, cupro-nickel for the capsules. specifications
- GOST 1020-97 Brass casting ingots. stamps
- GOST 10234-77 Rolled steel tape medium strength. specifications
- GOST 10243-75 steel. Test methods and evaluation of the macrostructure.
- GOST 10284-84 Inserts blank of cemented carbides for upsetting tool. Shapes and sizes.
- GOST 10285-81 Inserts upsetting for the workpiece and tool plate-blanks for cutting knives of hard sintered alloys. Technical conditions.
- GOST 10297-94 India. specifications
- GOST 10298-79 selenium technical. specifications
- Standard 103-2006 hot rolled steel for the steel strip. assortment
- GOST 10446-80 Wire Method of tensile test.
- GOST 10447-93 Wire. Test method for winding.
- GOST 1048-79 Tape made of aluminum bronze for springs. specifications
- GOST 1049-74 Wire of manganese nickel. specifications
- GOST 10498-82 seamless pipes extra thin-walled corrosion-resistant stainless steel. specifications
- GOST 1050-88 roll stock, calibration, with special surface finish quality structural carbon steel. General specifications
- GOST 10505-76 Steel ropes closed lifting. Technical conditions.
- GOST 10506-76 Steel ropes closed lifting. Assortment.
- GOST 1051-73 Rolled calibrated. General specifications
- GOST 10510-80 Metals. Test method for extrusion of sheets and strips of Erichsen.
- GOST 10533-86 Tape cold of thermostatic bimetals. specifications
- GOST 10543-98 Steel wire surfacing. specifications
- GOST 10551-75 Steel bent profile, corrugated. assortment
- GOST 1060-83 Pipes steel seamless cold for shipbuilding. specifications
- GOST 1066-90 Brass wire. specifications
- GOST 10692-80, steel pipes, cast iron and fittings to them. Acceptance, marking, packaging, transportation and storage
- GOST 10702-78 Rental of high-quality carbon structural steel and alloy steel for cold extrusion and landing. specifications
- GOST 10703-73 Aluminum sheets for the printing industry. specifications
- GOST 10704-91 electrically welded steel tubes. assortment
- GOST 10705-80 steel tubes. specifications
- GOST 10706-76 electrically welded steel tubes. Technical requirements
- GOST 10707-80 cold-steel tubes. specifications
- GOST 1071-81 steel wire heat-treated spring. specifications
- GOST 1077-79 Burners odnoplamennye universal for oxyacetylene welding, soldering and heating. Types, basic parameters and dimensions and general specifications
- GOST 10772-78 coatings casting antipenetration water. General specifications.
- GOST 10791-2004 Solid-rolled wheels. Technical conditions.
- GOST 10796-74 slitting cutters air atomization. Types and basic parameters.
- GOST 10821-2007 Wire made of platinum and platinum-rhodium alloys for thermoelectric converters. specifications
- GOST 10884-94 Steel reinforced thermo-hardened for reinforced concrete structures. specifications
- GOST 10885-85 Steels Hot-rolled two-layer corrosion-resistant. specifications
- GOST 1089-82 Antimony. Technical conditions. methods of analysis
- GOST 10922-90 Reinforcement and embedded products, welded connections welded reinforcement and inserts for reinforced concrete structures.
- GOST 10928-90 Bismuth. specifications
- GOST 10988-75 rods OFC for electric vacuum industry. specifications
- GOST 10994-74 Alloys precision. stamps
- GOST 11017-80 seamless steel pipes of high pressure. specifications
- GOST 11036-75 steel for electrical unalloyed. specifications
- GOST 11068-81 Electrically welded pipes made of corrosion-resistant steel. specifications
- GOST 11069-2001 Primary aluminum. stamps
- GOST 11070-74 primary aluminum ingots. specifications
- GOST 11150-84 Metals. Test Methods Tensile at reduced temperatures.
- GOST 11249-80 steel tubes brazed double-layer built-up. specifications
- GOST 11268-76 sheet steel, stainless, alloyed constructional special purposes. specifications
- GOST 11269-76 Rolled sheet and universal broadband special purpose of structural alloyed steel. specifications
- GOST 1131-76 Aluminum wrought alloys in ingots. specifications
- GOST 1133-71 Steel forged round and square. assortment
- GOST 11378-75 Plates billet made of hard sintered alloys for the cutting knives. Types and sizes.
- GOST 11383-75 Pipes made of copper and brass thin-walled. specifications
- GOST 11474-76 Steel bent profile. specifications
- GOST 1150-72 Plates zinc boiler. specifications
- GOST 11533-75 Automatic and semi-automatic submerged arc welding. Compounds welded at acute and obtuse angles. Main types, design elements and dimensions
- GOST 11534-75 manual arc welding. Compounds welded at acute and obtuse angles. Main types, design elements and dimensions
- GOST 11701-84 Metals. Test methods for stretching thin sheets and ribbons.
- Pipes GOST 11706-78. Test method for the distribution of the ring cone.
- GOST 1173-2006 foil, ribbon, sheet and plate made of copper. specifications
- GOST 1180-91 Zinc anodes. specifications
- GOST 11850-72 Steel wire for spring washers. specifications
- GOST 11861-91 Ferrosilicochrome. Specifications and terms of delivery.
- GOST 11878-66 austenitic steel. Methods of determining the content of ferritic phases in the rods.
- GOST 11930.0-79 surfacing materials. General requirements for methods of analysis.
- GOST 11930.1-79 surfacing materials. Methods for determination of carbon.
- GOST 11930.10-79 surfacing materials. Method for determination of tungsten.
- GOST 11930.11-79 surfacing materials. Method for determination of molybdenum.
- GOST 11930.12-79 surfacing materials. Method for determination of antimony.
- GOST 11930.2-79 surfacing materials. Method for determination of sulfur.
- GOST 11930.3-79 surfacing materials. Method for determination of silicon.
- GOST 11930.4-79 surfacing materials. Method for determination of chromium.
- GOST 11930.5-79 surfacing materials. Methods for determination of manganese.
- GOST 11930.6-79 surfacing materials. Methods for determination of nickel.
- GOST 11930.7-79 surfacing materials. Methods for the determination of iron.
- GOST 11930.8-79 surfacing materials. Method of determination of phosphorus.
- GOST 11930.9-79 surfacing materials. Methods for the determination of boron.
- GOST 11969-79 Fusion welding. Main provisions and their designations.
- GOST 12004-81 Reinforcing steel. Test Methods Tensile
- Pipes GOST 1208-90 bronze extruded. specifications
- GOST 1209-90 Babbity calcium in pigs. specifications
- GOST 12119.0-98 electrical steel. Methods for determining the magnetic and electrical properties. General requirements
- GOST 12132-66 steel tubes and seamless for motovelopromyshlennosti. specifications
- GOST 12135-75 Linings of spike fastening for railway rails P50. The design and dimensions.
- GOST 1215-79 castings of ductile iron. General specifications
- GOST 12169-82, steel billets, cut oxygen cutting. allowances
- GOST 12221-79 Equipment for plasma-arc cutting of metals. Types and main parameters
- GOST 12247-80 seamless steel cylinders large volume for gases and Fp 31,4 39,2 MPa (320 and 400 kgf / cm sq.). Technical conditions.
- GOST 123-2008 Cobalt. specifications
- GOST 12338-81 Iridium powder. specifications
- GOST 12339-79 Osmium powder. specifications
- GOST 12340-81 Palladium bullion. specifications
- GOST 12341-81 Platinum bullion. specifications
- GOST 12342-81 Rhodium powder. specifications
- GOST 12343-79 Ruthenium powder. specifications
- GOST 12344-2003 Alloyed and high. Methods for determination of carbon.
- GOST 12345-2001 Alloyed and high. Methods for determination of sulfur.
- GOST 12346-78 Steel alloyed and high. Methods for determination of silicon.
- GOST 12347-77 Steel alloyed and high. Methods for determination of phosphorus.
- GOST 12348-78 Steel alloyed and high. Methods for determination of manganese.
- GOST 12349-83 Steel alloyed and high. Methods for the determination of tungsten.
- GOST 12350-78 Steel alloyed and high. Methods for determination of chromium.
- GOST 12351-2003 Alloyed and high. Methods for the determination of vanadium.
- GOST 12352-81 Steel alloyed and high. Methods for determination of nickel.
- GOST 12353-78 Steel alloyed and high. Methods for determination of cobalt.
- GOST 12354-81 Steel alloyed and high. Methods for determination of molybdenum.
- GOST 12355-78 Steel alloyed and high. Methods for determination of copper.
- GOST 12356-81 Steel alloyed and high. Methods for determination of titanium.
- GOST 12357-84 Steel alloyed and high. Methods for determination of aluminum.
- GOST 12358-2002 Alloyed and high. Methods for the determination of arsenic.
- GOST 12359-99 carbon steel, alloyed and high. Methods for the determination of nitrogen.
- GOST 12360-82 Steel alloyed and high. Methods for the determination of boron.
- GOST 12361-2002 Alloyed and high. Methods for determination of niobium.
- GOST 12362-79 Steel alloyed and high. Methods for the determination of trace antimony, lead, tin, zinc and cadmium.
- GOST 12363-79 Steel alloyed and high. Methods for determination of selenium.
- GOST 12364-84 Steel alloyed and high. Methods for determination of cerium.
- GOST 12365-84 Steel alloyed and high. Methods for determination of zirconium.
- GOST 12492.0-90 Rental for agricultural machines. General specifications.
- Pipes GOST 12501-67. Test method of torque.
- GOST 12503-75 steel. ultrasonic testing methods. General requirements.
- GOST 12601-76 Zinc Powder. Technical conditions.
- GOST 12635-67 soft magnetic materials high. Test methods in the frequency range of 10 kHz to 1 MHz.
- GOST 12636-67 soft magnetic materials high. Test methods in the frequency range of 1 to 200 MHz.
- GOST 12637-67 soft magnetic materials high. Test methods in the frequency range from 200 to 2000 MHz.
- GOST 12766.1-90 wire of precision alloys with high electrical resistance. specifications
- GOST 12766.2-90 stream of precision alloys with high electrical resistance. specifications
- GOST 12766.3-90 calibrated precision alloys with high electrical resistance. specifications
- Standard roll stock from 12766.4-90 precision alloys with high electrical resistance. specifications
- GOST 12766.5-90 tape Rolled precision alloy with high electrical resistance.
- GOST 12797-77 Technical Gallium. specifications
- GOST 1292-81 Alloys of lead-antimony. specifications
- GOST 12920-67 brass wire for cold heading. specifications
- GOST 13020.1-85 Metallic chrome. Method for determination of chromium.
- GOST 13020.11-85 Metallic chrome. Methods for the determination of zinc, lead and bismuth.
- GOST 13020.12-85 Metallic chrome. Arsenic determination method.
- GOST 13020.13-85 Metallic chrome. Method for determination of antimony.
- GOST 13020.14-85 Metallic chrome. Methods for determination of copper.
- GOST 13020.15-85 Metallic chrome. Methods for determination of the tin.
- GOST 13020.16-85 Metallic chrome. Method for determination of cobalt.
- GOST 13020.4-85 Metallic chrome. Method of determination of phosphorus.
- GOST 13020.5-85 Metallic chrome. Methods for determination of silicon.
- GOST 13020.6-85 Metallic chrome. Methods for determining the total aluminum.
- GOST 13020.7-85 Metallic chrome. Methods for the determination of nitrogen.
- GOST 13020.8-85 Metallic chrome. Methods for the determination of iron.
- GOST 13073-77 Wire zinc. specifications
- GOST 13083-77 rods of nickel and silicon nickel. specifications
- GOST 13084-88 Powders of high-alloy steels and alloys. Technical conditions.
- GOST 13098-2006 Rhodium. Brand.
- GOST 13099-2006 Iridium. stamps
- GOST 13114-75 Plates billet without shelves for stamping dies. Design and dimensions
- GOST 13151.1-89 Ferro. Method for determination of molybdenum.
- GOST 13151.10-82 Ferro. Method for determination of antimony.
- GOST 13151.11-77 Ferro. Method for determination of arsenic content.
- GOST 13151.2-82 Ferro. Methods for the determination of tungsten.
- GOST 13151.5-89 Ferro. Method for determination of silicon.
- GOST 13151.6-94 Ferro. Method of determination of phosphorus.
- GOST 13151.7-82 Ferro. Methods for determination of copper.
- GOST 13151.8-77 Ferro. Methods for the determination of zinc, lead and bismuth.
- GOST 13151.9-82 Ferro. Methods for determination of the tin.
- GOST 1320-74 Babbity tin and lead. specifications
- GOST 13201.1-93 Ferrosilicochrome. Method for determination of chromium.
- GOST 13201.2-77 Ferrosilicochrome. Method for determination of the silicon content.
- GOST 13201.6-77 Ferrosilicochrome. Method for determination of phosphorus.
- GOST 13217.1-90 ferrovanadium. Method for the determination of vanadium.
- GOST 13217.11-90 ferrovanadium. Methods for the determination of arsenic.
- GOST 13217.4-90 ferrovanadium. Methods for determination of silicon.
- GOST 13217.5-90 ferrovanadium. Methods for determination of phosphorus.
- GOST 13217.6-90 ferrovanadium. Methods for determination of manganese.
- GOST 13217.7-90 ferrovanadium. Methods for determining the total aluminum.
- GOST 13217.8-90 ferrovanadium. Methods for determination of chromium.
- GOST 13217.9-90 ferrovanadium. Methods for determination of copper.
- GOST 13229-78 Steel bent profile, the Zetas. assortment
- GOST 13230.1-93 Ferrosilicon. Methods for determination of silicon.
- GOST 13230.4-93 Ferrosilicon. Method of determination of phosphorus.
- GOST 13230.5-93 Ferrosilicon. Methods for determination of manganese.
- GOST 13230.6-93 Ferrosilicon. Methods for determination of chromium.
- GOST 13230.7-93 Ferrosilicon. Methods for determination of aluminum.
- GOST 13230.8-93 Ferrosilicon. Methods for the determination of calcium.
- GOST 13230.9-93 Ferrosilicon. Methods for determination of titanium.
- GOST 13345-85 Tin. specifications
- GOST 13462-79 Palladium and palladium alloys. Brand.
- GOST 13498-79 Platinum and platinum alloys. stamps
- GOST 13548-77 thin-walled tubes of nickel and nickel alloys. specifications
- GOST 13585-68 steel. Method for determining the roll samples permitted modes of arc welding and building.
- GOST 13603-89 Filter wire twisted with hexagonal cells. Technical conditions.
- GOST 13616-97 Extruded rectangular cross section strip of aluminum, aluminum and magnesium alloys. assortment
- GOST 13617-97 Extruded bulb-angular cross section of aluminum, aluminum and magnesium alloys. assortment
- GOST 13618-97 Extruded oblique fitting of the angle sections made of aluminum, aluminum and magnesium alloys. assortment
- GOST 13619-97 Extruded rectangular shaped Zeta section of aluminum, aluminum and magnesium alloys. assortment
- GOST 13620-90 Extruded rectangular equilateral Zeta sections from aluminum and magnesium alloys. assortment
- GOST 13621-90 Extruded rectangular equilateral I-section aluminum and magnesium alloys. assortment
- GOST 13622-91 Extruded rectangular equilateral T-section from aluminum and magnesium alloys. assortment
- GOST 13623-90 Extruded rectangular equilateral channel section from aluminum and magnesium alloys. assortment
- GOST 13624-90 Extruded rectangular flanged channel section from aluminum and magnesium alloys. assortment
- GOST 13663-86 steel profile pipes. Technical requirements
- GOST 13726-97 tapes of aluminum and aluminum alloys. specifications
- GOST 13737-90 Extruded rectangular equilateral angular sections from aluminum and magnesium alloys. assortment
- GOST 13738-91 Extruded rectangular unequal angular sections from aluminum and magnesium alloys. assortment
- GOST 13813-68 Metals. The test method for bend sheets and strips of less than 4 mm thick.
- GOST 13833-77 carbide blades for the disk of saw blades. The design and dimensions.
- GOST 13834-77 Plates Carbide for wood milling cutters and drills. The design and dimensions.
- GOST 13840-68 Steel ropes reinforcing 1h7. Technical conditions.
- GOST 13843-78 Rolled aluminum. specifications
- GOST 13861-89 Reducers for flame treatment. General specifications
- GOST 13898-1-2006 Steel and iron. Atomic emission spectrometry with inductively coupled plasma method for determination of nickel, copper and cobalt. Part 1: General requirements
- GOST 13898-2-2006 Steel and iron. Atomic emission spectrometry with inductively coupled plasma method for determination of nickel, copper and cobalt. Part 2: Determination of nickel
- GOST 14019-2003 metallic materials. Test method for flexural strength.
- GOST 14021.1-78 Ferroboron. Methods for the determination of boron.
- GOST 14021.4-78 Ferroboron. Methods for determination of silicon.
- GOST 14021.5-78 Ferroboron. Method of determination of phosphorus.
- GOST 14021.6-78 Ferroboron. Methods for determination of manganese.
- GOST 14021.7-78 Ferroboron. Methods for determination of copper.
- GOST 14021.8-78 Ferroboron. Methods for determination of aluminum.
- GOST 14080-78 stream of precision alloys with a predetermined temperature coefficient of linear expansion. specifications
- GOST 14081-78 wire of precision alloys with a predetermined temperature coefficient of linear expansion. specifications
- GOST 14082-78, rods and sheets of precision alloys with a predetermined temperature koeffotsientom linear expansion. specifications
- GOST 14086-68 atomized powder of stainless chromium-nickel steels and nickel.
- GOST 14111-90 Electrodes straight lines for contact spot welding. Types and Sizes
- GOST 14113-78 Aluminum antifriction alloys. stamps
- GOST 14117-85 tapes of precision alloys for elastic elements. specifications
- GOST 14118-85 wire of precision alloys for elastic elements. specifications
- GOST 14119-85 rods of precision alloys for elastic elements. specifications
- GOST 1412-85 Cast iron with lamellar graphite for castings. stamps
- GOST 1414-75 Rolled structural steel high machinability. specifications
- GOST 1415-93 Ferrosilicon. Technical specifications and conditions of delivery
- GOST 14162-79 Tubes steel of small sizes (capillary). specifications
- GOST 14192-96 Marking of cargoes.
- GOST 14250.1-90 Ferrotitanium. Titanium determination method.
- GOST 14250.10-80 Ferrotitanium. Methods for determination of the tin.
- GOST 14250.11-80 Ferrotitanium. Methods for determination of zirconium.
- GOST 14250.12-85 Ferrotitanium. Methods for determination of chromium.
- GOST 14250.13-85 Ferrotitanium. Methods for determination of manganese.
- GOST 14250.4-90 Ferrotitanium. Method of determination of phosphorus.
- GOST 14250.5-90 Ferrotitanium. Methods for determination of copper.
- GOST 14250.6-90 Ferrotitanium. Method for determination of aluminum.
- GOST 14250.7-90 Ferrotitanium. Method for determination of silicon.
- GOST 14250.8-80 Ferrotitanium. Methods for the determination of vanadium.
- GOST 14250.9-80 Ferrotitanium. Methods for determination of molybdenum.
- GOST 14311-85 Steel cord. Technical conditions. specifications
- GOST 1435-99 rods, strips of tool unalloyed steel coils. General specifications
- GOST 14350-80 rolled Profiles bent. Terms and Definitions
- GOST 14635-93 Steel bent profile, special for car building. assortment
- GOST 14637-89 Rolled plate of carbon steel of ordinary quality. specifications
- GOST 14638.1-81 Ferrotungsten. Methods for the determination of tungsten.
- GOST 14638.11-84 Ferrotungsten. Method for determination of lead.
- GOST 14638.12-84 Ferrotungsten. Method for determination of antimony.
- GOST 14638.13-84 Ferrotungsten. Methods for determination of the tin.
- GOST 14638.14-84 Ferrotungsten. Methods for determination of bismuth.
- GOST 14638.15-84 Ferrotungsten. Arsenic determination method.
- GOST 14638.3-81 Ferrotungsten. Method of determination of phosphorus.
- GOST 14638.4-81 Ferrotungsten. Method for determination of silicon.
- GOST 14638.5-81 Ferrotungsten. Method for determination of manganese.
- GOST 14638.6-84 Ferrotungsten. Method for determination of aluminum.
- GOST 14638.8-84 Ferrotungsten. Method for determination of molybdenum.
- GOST 14638.9-84 Ferrotungsten. Methods for determination of copper.
- GOST 1467-93 Cadmium. Technical conditions.
- GOST 1468-90 cadmium anodes. Technical conditions.
- GOST 14771-76 Arc welding in a protective gas. Joints. Main types, design elements and dimensions
- GOST 14776-79 Arc welding. Welded connection point. Main types, design elements and dimensions
- GOST 14782-86 Non-destructive testing. Joints. Ultrasonic methods.
- GOST 14792-80 details and workpiece, cut and oxygen plasma arc cutting. Precision, quality cutting surface
- GOST 14806-80 Arc welding of aluminum and aluminum alloys in an inert gas. Joints. Main types, design elements and dimensions
- GOST 14836-82 Palladium powder. Technical conditions.
- GOST 14837-79 platinum powder. Technical conditions.
- GOST 14838-78 wire of aluminum and aluminum alloys for cold heading. specifications
- GOST 14848-69 Ferroboron. specifications
- GOST 14858.3-81 Silicocalcium. Method for determination of phosphorus.
- GOST 14858.4-91 Silicocalcium. Method for determination of silicon.
- GOST 14858.5-81 Silicocalcium. Method for determination of the iron content.
- GOST 14858.6-91 Silicocalcium. Method for determination of calcium.
- GOST 14858.7-91 Silicocalcium. Methods for determination of aluminum.
- GOST 14918-80 galvanized sheet steel with continuous lines. specifications
- GOST 14954-80 double lay rope type LK-F 6h19 structure (1 + 6 + 6/6) + 7x7 (1 + 6). Assortment.
- GOST 14955-77 quality round steel with a special surface finish. specifications
- GOST 14957-76 Magnesium alloys wrought. Brand.
- GOST 14959-79 Car made of spring steel, carbon and alloy steel. specifications
- GOST 14963-78 Steel wire alloy spring. specifications
- GOST 1497-84 Metals. Methods of test for tensile.
- Pipes GOST 15040-77 OFC. specifications
- GOST 15146-69 Steel belts heat-treated for voice reeds of musical instruments. Technical conditions.
- GOST 15150-69 Machines, tools and other industrial products. Versions for different climatic regions. Categories, operating, storage and transportation of the impact of climatic factors of the environment
- GOST 15164-78 Electroslag welding. Joints. Main types, design elements and dimensions
- GOST 1525-91 Bars, Monel. specifications
- GOST 1526-81 steel wire, galvanized for reservation of electric wires and cables. specifications
- GOST 1535-2006 Copper wire rods. assortment
- GOST 1545-80 Wire. Test method for twisting.
- GOST 15467-79 Quality Management. Basic Concepts. Terms and Definitions
- GOST 15471-77 strip and oxygen-free copper for electronic equipment. specifications
- GOST 15497-91 molding boxes-cast from aluminum and magnesium alloys rectangular dimensions: length 800 to 900 mm, a width of 500 to 700 mm, a height of 150 to 200 mm. Design
- GOST 15515-70 Feeds nickel electrolysis. specifications
- GOST 15527-2004 copper-zinc alloys (brass), processed pressure. stamps
- GOST 15598-70 steel wire string. specifications
- GOST 1577-93 Rolled plate and wide strips of structural quality steel. specifications
- GOST 1579-93 Wire. Test Method for bend.
- GOST 1583-93 Aluminum foundry alloys. specifications
- GOST 15830-84 Metal forming. Stamps. Terms and Definitions.
- GOST 15834-77 Wire of beryllium bronze. specifications
- GOST 15835-70 rods made of beryllium bronze. specifications
- GOST 15846-2002 Products, to the areas of Far North and equivalent areas. Packaging, labeling, transportation and storage
- GOST 1585-85 Cast iron antifriction for castings. stamps
- GOST 15860-84 welded steel cylinders for liquefied petroleum gas for pressure up to 1.6 MPa. Technical conditions.
- GOST 15878-79 Resistance welding. Joints. Design elements and dimensions
- GOST 15885-77 tapes and strips of tin-zinc-lead bronze. specifications
- GOST 15891-70 Hot-rolled steel strip to a molded bilayer plowshares. specifications
- GOST 15892-70 galvanized steel wire dressing for overhead lines. specifications
- GOST 15933.11-70 Ferroniobium. Method for determining nitrogen content.
- GOST 15933.12-70 Ferroniobium. Method for determination of cobalt content.
- GOST 15933.13-70 Ferroniobium. Method for the determination of bismuth content.
- GOST 15933.14-70 Ferroniobium. Method for determination of the tin content.
- GOST 15933.15-70 Ferroniobium. Method for determination of arsenic content.
- GOST 15933.16-70 Ferroniobium. Method for determination of antimony content.
- GOST 15933.17-70 Ferroniobium. Method for the determination of zinc content.
- GOST 15933.18-70 Ferroniobium. Method for determination of lead content.
- GOST 15933.3-90 Ferroniobium. Method of determination of phosphorus.
- GOST 15933.4-90 Ferroniobium. Method for determination of silicon.
- GOST 15933.5-90 Ferroniobium. Method for determining the amount of niobium and tantalum.
- GOST 15933.6-90 Ferroniobium. Method of determination of tantalum.
- GOST 15933.7-90 Ferroniobium. Method for determination of aluminum.
- GOST 15933.8-90 Ferroniobium. Titanium determination method.
- GOST 1595-90 and strip of aluminum-manganese bronze. specifications
- GOST 16016-79 Terminal bolts for rail fastenings of railway track. The design and dimensions. Technical requirements.
- GOST 16017-79 Bolts mortgages for rail fastenings of railway track. The design and dimensions. Technical requirements.
- GOST 16018-79 nuts Terminal bolts and embedded rail fastening the railway track. The design and dimensions. Technical requirements.
- GOST 16037-80 Compounds welded steel pipe. Main types, design elements and dimensions
- GOST 16038-80 Welding arc. Compounds welded pipes made of copper and copper-nickel alloy. Main types, design elements and dimensions
- GOST 16098-80 Compounds welded two-layer corrosion-resistant steel. Main types, design elements and dimensions
- GOST 16099-80 Niobium ingots. specifications
- GOST 16100-79 niobium rods. specifications
- GOST 16130-90 wire and rods of copper and copper-based alloys for welding. specifications
- GOST 16135-70 Steel wire for computer equipment. specifications
- GOST 16153-80 monocrystalline germanium. specifications
- GOST 16277-93 Linings separate fastening railway rails type P50, P65 and P75. Technical conditions.
- GOST 1628-78 Bronze wire rods. specifications
- GOST 16358-79 Copper belts for coaxial trunk cables. specifications
- GOST 1639-93 scrap and waste of non-ferrous metals and alloys. General specifications
- GOST 16482-70 black secondary metals. Terms and Definitions.
- GOST 16504-81 state testing system products. Testing and quality control. Basic Terms and Definitions
- GOST 16523-97 Rolled sheet made of carbon steel quality and ordinary general-purpose quality. specifications
- GOST 16591.3-94 Ferrosilicomanganese. Methods for determination of manganese.
- GOST 16591.4-87 Silicomanganese. Methods for determination of silicon.
- GOST 16591.5-94 Ferrosilicomanganese. Method of determination of phosphorus.
- GOST 1668-73 steel wire, galvanized for overhead lines. specifications
- GOST 16698.1-93 Metallic manganese and manganese nitride. Method for determination of manganese.
- GOST 16698.10-71 Metallic manganese and manganese metal nitride. Method for determination of aluminum.
- GOST 16698.11-71 Metallic manganese and manganese metal nitride. Titanium determination method.
- GOST 16698.12-84 Metallic manganese and manganese metal nitride. Method for determination of calcium and magnesium.
- GOST 16698.13-93 Metallic manganese and manganese nitride. nitrogen determination method.
- GOST 16698.4-93 Metallic manganese and manganese nitride. Methods for determination of phosphorus.
- GOST 16698.5-93 Metallic manganese and manganese nitride. Methods for determination of silicon.
- GOST 16698.6-93 Metallic manganese and manganese nitride. Methods for the determination of iron.
- GOST 16698.7-71 Metallic manganese and manganese metal nitride. Methods for determination of nickel.
- GOST 16698.9-71 Metallic manganese and manganese metal nitride. Methods for determination of copper.
- Pipes GOST 167-69 lead.
- GOST 16773-2003 Ferroniobium. Technical specifications and conditions of delivery
- GOST 16774-78 Pipes made of copper rectangular and square. specifications
- GOST 16827-81 double rope stranding mnogopryadny malokrutyaschiysya type LK-PO 12h36 construction (1 + 7 + 7/7 + 14) + 6h36 (1 + 7 + 7/7 + 14) + 1 os Assortment.
- GOST 16828-81 double rope stranding mnogopryadny malokrutyaschiysya type LK and LK-O-P structure 12x7 (1 + 6) + 6h19 (1 + 6 + 6/6) + 1 os Assortment.
- GOST 16853-88 Steel ropes for tackle for production and deep exploration drilling. Technical conditions.
- GOST 16931-71 Wire tinned copper for electrical purposes. Method for determining the quality of the tin coating
- GOST 16971-71 seams welded joints of vinyl plastic, polyvinyl chloride plastic and polyethylene. quality control methods. General requirements
- GOST 17001.4-86 Ferrosilikotsirkony. Methods for determination of zirconium.
- GOST 17001.5-86 Ferrosilikotsirkony. Methods for determination of phosphorus.
- GOST 17001.6-86 Ferrosilikotsirkony. Method for determination of silicon.
- GOST 17001.7-86 Ferrosilikotsirkony. Methods for determination of copper.
- GOST 17001.8-86 Ferrosilikotsirkony. Method for determination of aluminum.
- GOST 17051-82 Steel alloyed and high. Methods for determination of tantalum.
- GOST 17066-94 Rolled sheet of high strength steel. specifications
- GOST 17152-89 Hot-rolled steel profiles for earthmoving machinery knives. General specifications
- GOST 17163-90 Plates Carbide soldered type 13. Design and dimensions.
- Pipes GOST 17217-79 of copper-nickel alloy MNZH5-1 mark. specifications
- GOST 17232-99 plates of aluminum and aluminum alloys. specifications
- GOST 17260-87 Ferroalloys, metal chromium and manganese. General requirements for the selection and preparation of samples for chemical analysis.
- GOST 17293-93 Ferrotungsten. Technical specifications and conditions of delivery
- GOST 17305-91 Wire of carbon structural steel. specifications
- GOST 17325-79 soldering and tinning. Basic Terms and Definitions
- GOST 17328-78 Bronze bezolovyanye casting ingots. specifications
- GOST 17349-79 Pike. classification methods
- GOST 17359-82 Powder metallurgy. Terms and Definitions.
- GOST 17367-71 Metals. Test method for abrasion by friction of the fixed abrasive particles.
- GOST 17410-78 Non-destructive testing. metallic seamless cylindrical tube. Methods ultrasonic flaw
- GOST 17431-72 powder materials. Leaves from alloy grade M-IP. specifications
- GOST 17432-72 powder materials. Rods and forging of the alloy grade M-IP. specifications
- GOST 17507-85 rails Ostryakova OR65. Dimensions.
- GOST 17508-85 rails Ostryakova OR50. Dimensions.
- GOST 17575-90 Extruded rectangular cross section tavroshvellernogo from aluminum and magnesium alloys. assortment
- GOST 17576-97 Extruded oblique flanged trapezoidal cross section made of aluminum, aluminum and magnesium alloys. assortment
- GOST 1761-92 Strips and strips of tin-phosphorous and tin-zinc bronze. specifications
- GOST 17614-80 Tellurium technical. specifications
- GOST 1763-68 steel. Methods for determining the depth of decarburized layer.
- GOST 17711-93 Alloys copper-zinc (brass) foundry. stamps
- GOST 17745-90 steels and alloys. Methods for determining gas.
- GOST 17746-96 Titanium sponge. specifications
- GOST 1778-70 steel. Metallographic methods for determining the non-metallic inclusions.
- GOST 17809-72 Materials-magnetic alloy. stamps
- GOST 1789-70 and strip of beryllium bronze. specifications
- GOST 1791-67 Wire of nickel and copper-nickel alloys for elongating the wires to the thermoelectric transducers. specifications
- GOST 18130-79 Semiautomatic for arc welding with consumable electrode. General specifications
- GOST 18143-72 Wire of high corrosion-resistant and heat-resistant steel. specifications
- GOST 18169-86 Technological foundry processes. Terms and Definitions
- GOST 18175-78 Bronze Tinless processed pressure. stamps
- GOST 18227-98 Sintered metal materials, excluding hardmetals. Samples for tensile testing
- GOST 18232-83 kontrrelsovye rails. specifications
- GOST 18295-72-hardening. Terms and Definitions.
- GOST 18296-72 Treatment of surface plastic deformation. Terms and Definitions.
- GOST 18326-87 sheets of low alloyed zinc alloys for single stage and multistage etching. specifications
- GOST 18327-73 General purpose tapes zinc. specifications
- GOST 18337-95 Thallium. Technical conditions.
- GOST 18351-73 Rods extruded magnesium alloy. specifications
- GOST 18389-73 Wire made of platinum and its alloys. specifications
- GOST 18390-73 Wire of palladium and its alloys. specifications
- GOST 18394-73 Foil Lead, tin plated and tin. specifications
- Pipes GOST 18475-82 cold-aluminum and aluminum alloys. specifications
- Pipes GOST 18482-79 extruded from aluminum and aluminum alloys. specifications
- GOST 18576-96 Non-destructive testing. Railway rails. Ultrasonic methods.
- GOST 18591-91 Aluminum profiles special. Assortment. Technical requirements
- GOST 18661-73 steel. Measurement of hardness by indentation shock.
- GOST 18662-83 SVP hot-rolled profiles for mine working. assortment
- GOST 18834-83 Wire magnetic recording harmonic signals. specifications
- GOST 18835-73 Metals. Method for measuring hardness of plastic.
- GOST 18846-73 Zinc foil. specifications
- GOST 18895-97 steel. photoelectric spectral analysis method.
- GOST 18899-73 Steel ropes. Ropes closed carriers. Technical conditions.
- GOST 18901-73 Steel ropes. Rope indoor carrier with two layers zetobraznoy wire and TK-type core. Assortment.
- GOST 18903-73 Tungsten wire. assortment
- GOST 18905-73 Wire molybdenum. assortment
- GOST 18907-73 rods cold-worked, heat treated and polished steel of a high corrosion resistant. specifications
- GOST 18968-73 rods and strip of corrosion resistant and heat resistant steel for steam turbine blades. specifications
- GOST 18970-84 Metal forming. forging and stamping operations. Terms and Definitions
- GOST 18978-73 Scrap and waste ferrous metals and alloys. Terms and Definitions.
- GOST 19040-81 metal pipes. Test method for stretching at elevated temperatures.
- GOST 19042-80 indexable multi-faceted. Classification. Notation. Form.
- GOST 19043-80 Plates cutting carbide replaceable many-sided triangular shape. The design and dimensions.
- GOST 19044-80 Plates cutting carbide replaceable many-sided triangular shape with an opening. The design and dimensions.
- GOST 19045-80 Plates polyhedral carbide cutting inserts with triangular shaped clearance angle 11 °. The design and dimensions.
- GOST 19046-80 Plates polyhedral carbide cutting inserts with triangular shaped opening and a chip breaker groove on one side. The design and dimensions.
- GOST 19047-80 Plates carbide cutting inserts faceted hexagonal shape with an angle of 80 ° and an aperture. The design and dimensions.
- GOST 19048-80 Plates carbide cutting inserts faceted hexagonal shape with an angle of 80 ° with the chip breaker groove and a hole. The design and dimensions.
- GOST 19050-80 Plates polyhedral carbide cutting inserts with square shaped clearance angle 11 °. The design and dimensions.
- GOST 19051-80 Plates polyhedral carbide cutting inserts with square-shaped opening. The design and dimensions.
- GOST 19052-80 Plates polyhedral carbide cutting inserts with square-shaped opening and a chip breaker groove on one side. The design and dimensions.
- GOST 19053-80 Plates polyhedral carbide cutting inserts with square shaped hole and chamfered apex. The design and dimensions.
- GOST 19056-80 Plates carbide cutting inserts polyhedral rhombic shape with angle of 80 °. The design and dimensions.
- GOST 19057-80 Plates cutting carbide replaceable many-sided diamond-shaped with an angle of 80 degrees. and the hole. Design and dimensions
- GOST 19059-80 Plates polyhedral carbide cutting inserts rhombic shape with angle of 80 °, with the hole and the chipbreaking grooves on one side. The design and dimensions.
- GOST 19061-80 Plates carbide cutting inserts polyhedral parallelogram shape with an angle of 84 ° and chamfers on the cutting edges. The design and dimensions.
- GOST 19062-80 Plates polyhedral carbide cutting inserts parallelogram shape with an angle of 55 ° and a chip breaker groove on one side. The design and dimensions.
- GOST 19063-80 Plates cutting carbide replaceable many-sided pentagon shape. The design and dimensions.
- GOST 19064-80 Plates cutting carbide replaceable many-sided pentagon shape with a hole. The design and dimensions.
- GOST 19065-80 Plates polyhedral carbide cutting inserts with pentagonal shaped opening and the chipbreaking grooves on one side. The design and dimensions.
- GOST 19067-80 Plates cutting carbide replaceable many-sided hexagonal shape with hole. The design and dimensions.
- GOST 19068-80 Plates polyhedral carbide cutting inserts with a hexagonal bore and the chipbreaking grooves on one side. The design and dimensions.
- GOST 19069-80 Plates carbide cutting inserts faceted round shape. The design and dimensions.
- GOST 19070-80 Plates carbide cutting inserts polyhedral shape with a circular opening. The design and dimensions.
- GOST 19071-80 Plates carbide cutting inserts polyhedral shape with a circular opening and a chip breaker groove on one side. The design and dimensions.
- GOST 19072-80 Plates carbide cutting inserts polyhedral shape with a circular rear corner, and chip breaker groove opening on one side. The design and dimensions.
- GOST 19073-80 Plates bearing replaceable many-sided hard-triangular shape. The design and dimensions.
- GOST 19074-80 Plates bearing replaceable many-sided carbide triangular shape with a rear corner. The design and dimensions.
- GOST 19075-80 plates supporting polyhedral replaceable carbide hexagonal shape with an angle of 80 °. The design and dimensions.
- GOST 19076-80 plates supporting polyhedral carbide replaceable square shape. The design and dimensions.
- GOST 19077-80 Plates bearing replaceable many-sided carbide square shape with a rear corner. The design and dimensions.
- GOST 19078-80 plates supporting polyhedral replaceable carbide rhombic shape with an angle of 80 °. The design and dimensions.
- GOST 19079-80 Plates bearing replaceable many-sided carbide parallelogram shape. The design and dimensions.
- GOST 19080-80 Plates bearing replaceable many-sided pentagon shaped carbide. The design and dimensions.
- GOST 19081-80 Plates bearing replaceable many-sided carbide hexagonal shape. The design and dimensions.
- GOST 19083-80 plates supporting polyhedral carbide replaceable circular shape. The design and dimensions.
- GOST 19084-80 Chipbreaker replaceable many-sided hard-triangular shape. The design and dimensions.
- GOST 19085-80 chipbreaker carbide replaceable polyhedral square shape. The design and dimensions.
- GOST 19086-80 indexable carbide multifaceted. Technical conditions.
- GOST 19106-73 inserts of hard sintered alloys for separating and bending dies (blank).
- GOST 19127-73-headed pads to the rails type P43. The design and dimensions.
- GOST 19128-73-headed pads to the rails P50. The design and dimensions.
- GOST 19140-94 Rotators welding horizontal two-column. Types, basic parameters and dimensions
- GOST 19141-94 Rotators welding vertical. Types, basic parameters and dimensions
- GOST 19143-94 rotators Welding universal. Types, basic parameters and dimensions
- GOST 19200-80 castings of cast iron and steel. The terms and definitions of defects.
- GOST 19240-73 ground rails and hanging rails. assortment
- GOST 19241-80 Nickel and nickel alloys, low alloy processed pressure. stamps
- GOST 19248-90 solders. Classification and designation.
- GOST 19249-73 Connections solder. Basic types and parameters.
- GOST 19250-73 soldering fluxes. Classification.
- GOST 19265-73 and rods of high speed steel strip. specifications
- GOST 19277-73 Seamless steel pipes for oil-lines and fuel lines. specifications
- GOST 19281-89 rolled steel increased strength. General specifications
- GOST 193-79 copper ingots. specifications
- GOST 19351-2006 Wire made of iridium and rhodium. specifications
- GOST 19424-97 Zinc alloys for casting ingots. specifications
- GOST 19425-74 I-beam and channel steel special. assortment
- GOST 19437-81 flyuminievye cylindrical ingots. specifications
- Pipes GOST 19441-74 extruded magnesium alloy. specifications
- GOST 19442-74 rods shapes for blades and rods to connect steam turbine blades of stainless and heat resisting steel. specifications
- GOST 19521-74 metal welding. Classification
- GOST 19657-84 Extruded from magnesium alloys. specifications
- GOST 19658-81 silicon monocrystalline ingot.
- GOST 19671-91 Tungsten wire for light sources. specifications
- GOST 19703-79 Wire Brass brand LS 63-3. specifications
- GOST 19738-74 silver solders. stamps
- GOST 19739-74 bands of silver solder. specifications
- GOST 19746-74 Wire from silver solders.
- GOST 19771-93 Steel bent corners equilateral. assortment
- GOST 19772-93 Steel bent unequal corners. assortment
- GOST 19807-91 Titanium and titanium alloys are deformed. stamps
- GOST 19851-74 Carbon Steel Tape cold. specifications
- GOST 19903-74 Hot Rolled sheet. assortment
- GOST 19904-90 Cold Rolled sheet. assortment
- GOST 19905-74 surface hardening metal articles thermochemical treatment. Composition general requirements
- GOST 20072-74 heat-resistant steel. specifications
- GOST 20295-85 welded steel pipes for oil pipelines trunk. specifications
- GOST 20312-90 Plates Carbide soldered type 51. Design and dimensions.
- GOST 20415-82 Non-destructive testing. Acoustic methods. General provisions
- GOST 20426-82 Non-destructive testing. radiation flaw detection methods. Application area.
- GOST 20485-75 Pike. Method for determination of flowing solder into the gap.
- GOST 20487-75 Pike. Test method for assessing the impact of the liquid on the mechanical properties of the solder of the soldered material.
- GOST 20495-75 hardening metal parts surface thermochemical treatment. The characteristics and properties of the diffusion layer. Terms and Definitions
- GOST 20515-75 Ferroniobium aluminothermic. The method of selection and preparation of samples for chemical analysis.
- GOST 20559-75 Firm alloys, ceramic tool materials. Acceptance rules and sampling methods.
- GOST 2060-2006 Brass bars. specifications
- GOST 20707-80 Tapes of copper and brass radiator. specifications
- GOST 20771-82 Crowns carbide brazed type 35. Design and dimensions.
- Pipes GOST 20900-75 waveguide copper and brass rectangular. specifications
- GOST 20967-75 Rolled aluminum alloy. specifications
- GOST 21007-75 of platinum wire for thermal resistance. specifications
- GOST 21014-88 Rolled ferrous metals. Terms and definitions surface defects.
- GOST 21022-75 chrome steel for precision bearings. specifications
- GOST 21026-75 channel steel, hot-rolled with the bent rack trolleys. assortment
- GOST 21073.0-0-ferrous metals. Determination of the grain. General requirements.
- GOST 21073.1-75 ferrous metals. Determination of the grain size by comparison with the scale microstructures.
- GOST 21073.2-75 ferrous metals. Determination grain value by counting the grains.
- GOST 21073.3-75 ferrous metals. Determination of the grain by grain counting intersections.
- GOST 21073.4-75 ferrous metals. Determination of the grain planimetric method.
- GOST 21120-75 rods and billets of circular and rectangular cross-section. Methods for ultrasonic inspection.
- GOST 21125-75 blanks of cemented carbide for smooth calibers. Shapes and sizes.
- GOST 2132-90 Nickel anodes. specifications
- GOST 21357-87 Castings, cold-resistant and wear-resistant steel. General specifications
- GOST 21399-75 overpack ingots, cathodes and ingots of non-ferrous metals. General requirements.
- GOST 21427.1-83 electrical steel cold-rolled anisotropic. specifications
- GOST 21427.2-83 Electrical Steel isotropic cold-rolled. specifications
- GOST 21427.4-78 Electrical steel tape, cold rolled anisotropic. specifications
- GOST 21437-95 Zinc alloys antifriction. Marks, technical requirements and test methods
- GOST 21438-95 Zinc antifriction alloys in pigs. specifications
- GOST 21448-75 Powders of alloys for cladding. Technical conditions.
- GOST 21449-75 rods for surfacing. Technical conditions.
- GOST 21488-97 Rods extruded from aluminum and aluminum alloys. specifications
- GOST 21547-76 Pike. Method for determination of soldering temperature.
- GOST 21548-76 Pike. Method of detecting and determining the thickness of the interlayer compound.
- GOST 21549-76 Pike. Method for determination of the soldered material erosion.
- GOST 21600.17-83 Ferrochrome. Methods for determination of chromium.
- GOST 21600.18-83 Ferrochrome. Methods for determining the total aluminum.
- GOST 21600.3-83 Ferrochrome. Method for determination of silicon.
- GOST 21600.4-83 Ferrochrome. Method of determination of phosphorus.
- GOST 21600.6-83 Ferrochrome. nitrogen determination method.
- GOST 21631-76 sheets of aluminum and aluminum alloys. specifications
- GOST 21639.0-93 Fluxes for electroslag remelting. General requirements for methods of analysis.
- GOST 21639.1-90 Fluxes for electroslag remelting. Methods for determination of moisture content.
- GOST 21639.10-76 Fluxes for electroslag remelting. Method for determination of sulfur.
- GOST 21639.11-76 Fluxes for electroslag remelting. Method for the determination of lead, zinc, titanium, antimony.
- GOST 21639.12-87 Fluxes for electroslag remelting. Methods for determination of manganese oxide.
- GOST 21639.2-93 Fluxes for electroslag remelting. Methods for determination of aluminum oxide.
- GOST 21639.3-93 Fluxes for electroslag remelting. Methods for determination of calcium oxide and magnesium oxide.
- GOST 21639.4-93 Fluxes for electroslag remelting. Methods for determination of total iron.
- GOST 21639.5-93 Fluxes for electroslag remelting. Method for determination of the titanium dioxide.
- GOST 21639.6-93 Fluxes for electroslag remelting. Method of determination of phosphorus.
- GOST 21639.7-93 Fluxes for electroslag remelting. Methods for determination of calcium fluoride.
- GOST 21639.8-93 Fluxes for electroslag remelting. Methods for determination of silicon dioxide.
- GOST 21639.9-93 Fluxes for electroslag remelting. Method for determination of carbon.
- Pipes GOST 21646-2003 copper and brass for heat exchangers. specifications
- GOST 2169-69 Silicon Technology. specifications
- GOST 21694-94 Welding mechanical equipment. General specifications
- GOST 2170-73 tapes of nickel and nickel alloys, low alloy. specifications
- GOST 2172-80 Steel rope for aircraft. Technical conditions.
- Pipes GOST 21729-76 teplodeformirovannye structural cold-formed and made of carbon and alloy steels. specifications
- GOST 2179-75 Wire of nickel and silicon nickel. specifications
- GOST 21876.1-76 ferromanganese. Method for determination of manganese.
- GOST 21876.4-76 ferromanganese. Methods for determination of silicon.
- GOST 21876.5-76 ferromanganese. Methods for determination of phosphorus.
- GOST 21910-76 Metals. The characteristics of heat resistance. Here, the definition, the calculated values and the units of formula
- GOST 21930-76 Tin-lead solder ingots. specifications
- GOST 21931-76 Tin-lead solder in products. specifications
- GOST 21937-76 Hot bulb sections for shipbuilding unbalanced. assortment
- Pipes GOST 21945-76 seamless hot-rolled titanium-based alloys. specifications
- GOST 21990-76 plates of magnesium alloys. specifications
- GOST 21996-76 Steel cold rolled ribbon termoobrabotanaya. specifications
- GOST 21997-76 Rolled Steel belts high strength. specifications
- GOST 22025-76 resistive silicon alloys. Technical conditions.
- GOST 2205-71 Tape and bands Tompakova for plating. specifications
- GOST 2208-2007 foil, tape, sheets and brass plates. specifications
- GOST 2209-90 Plates Napa carbide cutting tool. specifications
- GOST 22178-76 sheets of titanium and titanium alloys. specifications
- GOST 22233-2001 Extruded aluminum alloy for the translucent walling. specifications
- GOST 22306-77 metals and high purity. General requirements for methods of analysis.
- GOST 22310-93 Ferroalloys. Method for determination of particle size distribution.
- GOST 22343-90 Terminal separate rail fastening the railway track. Technical conditions.
- GOST 22366-93 Tape electrode surfacing sintered iron-based. Technical conditions.
- GOST 22411-77 rods of hot-rolled and forged alloys. assortment
- GOST 2246-70 steel wire welding. specifications
- GOST 22517-77 Hafnium iodide. specifications
- GOST 22536.0-87 Carbon steel and unalloyed cast iron. General requirements for methods of analysis.
- GOST 22536.1-88 Carbon steel and unalloyed cast iron. Methods for the determination of total carbon and graphite.
- GOST 22536.10-88 Carbon steel and unalloyed cast iron. Methods for determination of aluminum.
- GOST 22536.11-87 Carbon steel and unalloyed cast iron. Methods for determination of titanium.
- GOST 22536.12-88 Carbon steel and unalloyed cast iron. Methods for the determination of vanadium.
- GOST 22536.14-88 Carbon steel and unalloyed cast iron. Method for determination of zirconium.
- GOST 22536.2-87 Carbon steel and unalloyed cast iron. Methods for determination of sulfur.
- GOST 22536.3-88 Carbon steel and unalloyed cast iron. Methods for determination of phosphorus.
- GOST 22536.4-88 Carbon steel and unalloyed cast iron. Methods for determination of silicon.
- GOST 22536.5-87 Carbon steel and unalloyed cast iron. Methods for determination of manganese.
- GOST 22536.6-88 Carbon steel and unalloyed cast iron. Methods for the determination of arsenic.
- GOST 22536.7-88 Carbon steel and unalloyed cast iron. Methods for determination of chromium.
- GOST 22536.8-87 Carbon steel and unalloyed cast iron. Methods for determination of copper.
- GOST 22536.9-88 Carbon steel and unalloyed cast iron. Methods for determination of nickel.
- GOST 22635-77 Sheets of magnesium alloys. specifications
- GOST 22663-77 Materials thermocouple for low-temperature thermocouples. Test method for homogeneity.
- GOST 22666-77 wire of copper alloy and low-temperature thermoelectric kopel preobrazovateleey. specifications
- GOST 22706-77 Metals. Test Method Tensile at temperatures from minus 100 to minus 269 ° C.
- GOST 22727-88 Rolled sheet. ultrasonic testing methods.
- GOST 22761-77 metals and alloys. Method for measuring Brinell hardness portable hardness static effect.
- GOST 22762-77 metals and alloys. Method of measurement of hardness at the limit of fluidity ball indentation.
- GOST 22786-77 pipes Bimetallic jointless for shipbuilding. specifications
- GOST 2283-79 Tape cold-rolled made of tool steel and spring. specifications
- GOST 22838-77 refractory alloys. Methods of control and evaluation of the macrostructure.
- GOST 2284-79 Tape cold-rolled carbon structural steel. specifications
- GOST 22848-77 Metals. Method for testing the impact strength at temperatures ranging from minus 100 to minus 269 ° C.
- GOST 22860-93 high purity cadmium. specifications
- GOST 22861-93 Lead high purity. specifications
- Pipes GOST 22897-86 of seamless cold titanium-based alloys. specifications
- GOST 22957-78 profiles of casting wall integrally cast steel and cast iron flask. Design and dimensions
- GOST 22974.14-90 Melted welding fluxes. Method for determination of moisture content.
- GOST 22975-78 metals and alloys. Method of measuring hardness Rockwell hardness at low loads (Super-Rockwell).
- GOST 23046-78 Connections solder. impact test method.
- GOST 23055-78 Non-destructive testing. Fusion welding metals. Classification of welds on the results of radiographic testing.
- GOST 23118-99 Construction metal building. General specifications
- GOST 23137-78 Solders copper-zinc. stamps
- GOST 23178-78 high-temperature soldering fluxes torboratno and boride-halide. specifications
- GOST 23240-78 Designs welded. Method for assessing reactions by cold resistance welding arc burns.
- Pipes GOST 23270-89-blanks for machining. specifications
- GOST 23273-78 metals and alloys. hardness measurement method rebound pin (Shore).
- GOST 2330-76 Dies billet from hard sintered alloys for tube drawing circular cross section. Shapes and sizes. Technical conditions.
- GOST 2333-80 steel wire. types
- GOST 23338-91 metal welding. Methods for determination of diffusible hydrogen in the weld metal and the weld metal.
- GOST 23518-79 gas metal arc welding. Compounds welded at acute and obtuse angles. Main types, design elements and dimensions
- GOST 23522-79 Tape cold for hand saw blades. specifications
- GOST 23556-95 Columns for welding machines. Types, basic parameters and dimensions
- GOST 23677-79 Hardness metals. General technical requirements.
- GOST 23697-79 Welded welded aluminum alloy. specifications
- GOST 23705-79 rods and hot forged from superalloys. specifications
- GOST 23755-79 Plates of titanium and titanium alloys. specifications
- GOST 23786-79 Drill pipes of aluminum alloys. specifications
- GOST 23855-79 cylindrical ingots of aluminum alloy AD31. specifications
- GOST 2387-80 Steel ropes. Method of test for endurance.
- GOST 23870-79 weldability. Evaluation method fusion welding effect on the base metal
- GOST 23886-91 Sheets and cadmium plate. specifications
- GOST 23904-79 Pike. Method for determination of wetting solder materials.
- GOST 23912-79 Ligature mednoberillievaya. Technical conditions.
- GOST 23916-79 Metallic chrome. Methods of sampling and sample preparation for chemical and physico-chemical analysis.
- GOST 23949-80 Welding electrodes are non-consumable tungsten. specifications
- GOST 24018.0-90 heat-resistant alloys based on nickel. General requirements for methods of analysis.
- GOST 2402-82 welding units with internal combustion engines. General specifications
- GOST 24030-80 seamless pipes of stainless steel for power engineering.
- GOST 24045-94 Steel sheet formed sections with trapezoidal corrugations for building. specifications
- GOST 24167-80 Connections solder. Test Method for bend.
- GOST 2419-78 Precision alloys with high electrical resistance for the heating elements. Method for determination of survivability.
- GOST 24231-88 Non-ferrous metals and alloys. General requirements for the selection and preparation of samples for chemical analysis.
- GOST 24244-80 Cold Rolled sheet of mild steel for enamelware. specifications
- GOST 24247-80 Plates polyhedral carbide cutting inserts with triangular shaped opening and a chip breaker groove on the two sides. The design and dimensions.
- GOST 24248-80 Plates polyhedral carbide cutting inserts with square-shaped opening and a chip breaker groove on the two sides. The design and dimensions.
- GOST 24249-80 Plates polyhedral carbide cutting inserts rhombic shape with angle of 80 °, with the hole and the chipbreaking grooves on the two sides. The design and dimensions.
- GOST 24250-80 Plates cutting carbide replaceable many-sided triangular shape with a clearance angle and chip breaker groove. The design and dimensions.
- GOST 24251-80 Plates polyhedral carbide cutting inserts with triangular shaped rear angle of 20 °. The design and dimensions.
- GOST 24252-80 Plates polyhedral carbide cutting inserts with a square shape and the rear corner chip breaker groove. The design and dimensions.
- GOST 24253-80 Plates polyhedral carbide cutting inserts a square shape with a rear angle of 20 °. The design and dimensions.
- GOST 24254-80 supporting plates replaceable carbide rhombic shape with an angle of 55 °. The design and dimensions.
- GOST 24255-80 Plates polyhedral carbide cutting inserts rhombic shape with an angle of 55 ° and an aperture. The design and dimensions.
- GOST 24256-80 Plates carbide cutting inserts polyhedral orthorhombic form an angle c of 55 °, c bore and the chipbreaking grooves on one side. The design and dimensions.
- GOST 24257-80 Plates polyhedral carbide cutting inserts rhombic shape with an angle of 55 °, with the hole and the chipbreaking grooves on the two sides. The design and dimensions.
- GOST 24301-93 bars and tubes bronze and brass alloy. specifications
- GOST 24353-80 foil sheet of platinum, palladium and their alloys. specifications
- GOST 24507-80 Non-destructive testing. Forging of ferrous and non-ferrous metals. Methods for ultrasonic inspection.
- GOST 24552-81 foil of gold, silver and their alloys. specifications
- GOST 24648-90 Cast iron for castings. Sampling and preparation of samples for mechanical tests.
- GOST 24715-81 Connections solder. quality control methods.
- GOST 24718-81 Strips of platinum, palladium and their alloys, iridium and rhodium. specifications
- GOST 24723-81 Piping seawater galvanized steel. Calculation durability elements.
- GOST 24767-81 profiles cold formed of aluminum and aluminum alloys for enclosing building structures. specifications
- GOST 24890-81 Welded of titanium and titanium alloys. specifications
- GOST 24950-81 Curved bends and curves in the insertion portion bends linear steel main pipelines. specifications
- GOST 24982-81 Rolled sheet of corrosion-resistant, heat-resistant and heat-resistant alloys. specifications
- GOST 24991-81 Ferrochrome, ferrosilicochrome, ferrosilicon, ferroalloys, ferromanganese. Methods of sampling and sample preparation for chemical and physico-chemical analyzes
- GOST 25.001-78 Calculations and tests of strength in mechanical engineering. The complex technical and regulatory guidance documentation. General provisions
- GOST 25.101-83 Calculations and tests of strength. Methods schematic random loading processes of machine elements and designs and statistical representation of the results.
- 25.502-79 Standard Methods Mechanical testing of metals. Test methods for fatigue.
- GOST 25.503-97 Calculations and tests of strength. Methods of mechanical testing of metals. Test method for compression.
- GOST 25.504-82 Calculations and tests of strength. Methods for calculating the fatigue resistance characteristics.
- GOST 25.505-85 Calculations and tests of strength. Methods of mechanical testing of metals. Test Method for low-cycle fatigue under thermomechanical loading.
- GOST 25.506-85 Calculations and tests of strength. Methods of mechanical testing of metals. Determination of fracture toughness characteristics (fracture toughness) under static loading.
- GOST 25.507-85 Calculations and tests of strength in mechanical engineering. Test Methods Fatigue loading operating modes. General requirements
- GOST 25001-81 Blanks for heat exchanger sheet rolled and welded aluminum. specifications
- GOST 25003-81 Cutting replaceable many-sided ceramic plates. specifications
- GOST 25054-81 Forgings made of corrosion-resistant steels and alloys. General specifications
- GOST 25095-82 Sintered Alloys solid. Method for determining the modulus of elasticity (Young's modulus).
- GOST 25140-93 Zinc alloys for casting. stamps
- GOST 25172-82 Sintered Alloys solid. Method for determination of Vickers hardness.
- GOST 25207-85 Ferrotungsten, silicocalcium and ferroboron. Methods of sampling and sample preparation for chemical and physico-chemical analyzes.
- GOST 25225-82 Non-destructive testing. Seams welded pipe joint. Magnetic tape method.
- GOST 25282-93 Metallic powders. Method for determining the strength of the agglomerates.
- GOST 25393-90 Plates soldered carbide cutting tool. Types.
- GOST 25394-90 Plates Carbide soldered type 50. Design and dimensions.
- GOST 25395-90 carbide inserts brazed types 01, 02, 61, 62. The construction and dimensions.
- GOST 25396-90 Plates Carbide soldered types 10, 70. The design and dimensions.
- GOST 25397-90 Plates Carbide soldered types 06, 66. The design and dimensions.
- GOST 25398-90 brazed carbide inserts of type 11. The design and dimensions.
- GOST 25399-90 Plates Carbide soldered type 14. Design and dimensions.
- GOST 25400-90 Plates Carbide soldered type 21. Design and dimensions.
- GOST 25401-90 Plates Carbide soldered type 23. Design and dimensions.
- GOST 25402-90 Plates Carbide soldered type 09. Design and dimensions.
- GOST 25403-82 Plates carbide cutting inserts polyhedral shape with a circular relief angle 6 °, and a concave front surface. The design and dimensions.
- GOST 25404-90 brazed carbide inserts of type 15. The design and dimensions.
- GOST 25405-90 Plates Carbide soldered type 16. Design and dimensions.
- GOST 25406-90 Plates Carbide soldered type 17. Design and dimensions.
- GOST 25407-90 brazed carbide inserts of type 18. The design and dimensions.
- GOST 25408-90 Plates Carbide soldered type 20. Design and dimensions.
- GOST 25409-90 Plates Carbide soldered type 24. Design and dimensions.
- GOST 25410-82 Plates Carbide soldered type 27. Design and dimensions.
- GOST 25411-90 Plates Carbide soldered type 31. Design and dimensions.
- GOST 25412-90 Plates Carbide soldered type 32. Design and dimensions.
- GOST 25413-82 Plates Carbide soldered type 34. Design and dimensions.
- GOST 25414-90 Plates Carbide soldered type 36. Design and dimensions.
- GOST 25415-90 brazed carbide inserts of type 38. The design and dimensions.
- GOST 25416-90 Plates Carbide soldered type 39. Design and dimensions.
- GOST 25417-82 Plates Carbide soldered type 41. Design and dimensions.
- GOST 25418-82 polyhedral carbide chipbreaker removable circular shape. The design and dimensions.
- GOST 25419-90 Plates Carbide soldered type 43. Design and dimensions.
- GOST 25420-90 Plates Carbide soldered type 44. Design and dimensions.
- GOST 25421-90 Plates Carbide soldered type 47. Design and dimensions.
- GOST 25422-90 Plates Carbide soldered type 48. Design and dimensions.
- GOST 25423-90 Plates Carbide soldered type 49. Design and dimensions.
- GOST 25424-90 Plates Carbide soldered type 25. Design and dimensions.
- GOST 25425-90 Plates Carbide soldered type 26. Design and dimensions.
- GOST 25426-90 Plates Carbide soldered types 07, 67. The design and dimensions.
- GOST 25442-82 Molybdenum bands annealed for deep drawing. specifications
- GOST 25444-90 Electrodes straight lines and an electrode for spot welding. Tapered landing. dimensions
- GOST 25445-82 reels, spools and cores for welding wire. Basic dimensions.
- GOST 25474-82 silver anodes. specifications
- GOST 25475-82 Anodes golden. Technical conditions.
- GOST 25501-82 Semi-finished products of non-ferrous metals and alloys. Terms and Definitions.
- GOST 25536-82 Metals. Zoom in on pictures during metallographic research methods.
- GOST 25577-83 Steel bent profile closed welded square and rectangular. specifications
- GOST 25616-83 Power sources for arc welding. Test methods of welding properties.
- GOST 25639-83 Magnet cast permanent. Technical conditions.
- GOST 25712-88 clean bandages to the tram cars. Technical conditions.
- GOST 2581-78 Magnesium alloys in ingots. specifications
- GOST 2590-2006 Hot-rolled steel. assortment
- GOST 25905-83 Aluminum foil for capacitors. specifications
- GOST 2591-2006 Hot-rolled steel square. assortment
- GOST 25948-83 gallium arsenide and gallium phosphide single crystal. Measurement of electrical resistivity and the Hall coefficient.
- GOST 25997-83 metals Fusion welding. Statistical evaluation of the quality of the results of non-destructive testing.
- GOST 26007-83 calculations and tests of strength. Methods of mechanical testing of metals. Test methods for stress relaxation.
- GOST 2601-84 metal welding. Terms and definitions of basic concepts.
- GOST 26020-83 hot rolled steel I-beam with parallel faces shelves. assortment
- GOST 2604.1-77 iron alloy. Methods for determination of carbon.
- GOST 2604.10-77 iron alloy. Titanium determination method.
- GOST 2604.11-85 iron alloy. Methods for the determination of arsenic.
- GOST 2604.13-82 iron alloy. Methods for determination of aluminum.
- GOST 2604.14-82 iron alloy. Methods for determination of cobalt.
- GOST 2604.2-86 iron alloy. Methods for determination of sulfur.
- GOST 2604.3-83 iron alloy. Methods for determination of silicon.
- GOST 2604.4-87 iron alloy. Methods for determination of phosphorus.
- GOST 2604.5-84 iron alloy. Methods for determination of manganese.
- GOST 2604.6-77 iron alloy. Methods of determining the content of chromium.
- GOST 2604.7-84 iron alloy. Methods for the determination of vanadium.
- GOST 2604.8-77 iron alloy. Methods for determination of nickel.
- GOST 2604.9-83 iron alloy. Methods for determination of copper.
- GOST 26047-83, steel building constructions. Symbols (marks)
- GOST 26054-85 Robots industrial for contact welding. General specifications.
- GOST 26056-84 Industrial robots for arc welding. General specifications
- GOST 26101-84 Wire powder surfacing. specifications
- GOST 26110-84 rails kontrrelsovye RK75. Dimensions.
- GOST 26126-84 Non-destructive testing. Soldered connections. Ultrasonic methods of quality control.
- GOST 26131-84 Forgings of superalloys and heat resistant alloys. General specifications
- GOST 26168-84 rails Ostryakova OR75. Dimensions.
- GOST 26178-84 Magnetic tapes. Test methods for physical and mechanical properties.
- GOST 26201-84 ferrotitanium, ferromolybdenum and ferrovanadium. Methods of sampling and sample preparation for chemical and physico-chemical analyzes.
- Pipes GOST 2622-75 Manometric bronze BrOF4-0,25 brand and grade L63 brass. specifications
- GOST 2624-77 Pipes made of copper and brass capillary. specifications
- GOST 26250-84 Drill pipes for projectiles with removable core receiver. specifications
- GOST 26252-84 Powder niobium. Technical conditions.
- GOST 26271-84 Powder wire for arc welding of carbon and low-alloy steels. General specifications
- GOST 26358-84 castings of cast iron. General specifications
- GOST 26366-84 Brass Steel wire for side tire wheels. specifications
- GOST 26388-84 joints. Test methods for resistance to cold cracking during fusion welding.
- GOST 26389-84 joints. Test methods for resistance to hot cracking in fusion welding.
- GOST 26408-85 Columns for welding semiautomatic. Types, basic parameters and dimensions.
- GOST 26429-85 Steel constructions of suspended transport routes. specifications
- GOST 26446-85 Connections solder. Test methods for fatigue.
- GOST 26467-85 Tape powder fused. General specifications
- GOST 26468-85 deformable alloys based on niobium. stamps
- GOST 26469-85 Wire of palladium-tungsten alloy. specifications
- GOST 26492-85 rolled rods of titanium and titanium alloys. specifications
- GOST 26530-85 Sintered Alloys solid tungstenfree. Brand.
- GOST 26590-85 Ferroalloys. Packaging, labeling, transportation and storage.
- GOST 26630-85 Ceramic Tool Materials. Brand.
- GOST 26645-85 Casting of metals and alloys. Tolerances dimensions, weight and machining allowances
- GOST 26719-85 Materials antifriction powder-based copper. Brand.
- GOST 26802-86 Materials antifriction powder iron-based. stamps
- GOST 26877-91 Metal. Methods for measuring the shape deviations.
- GOST 2688-80 double lay rope type LK-F 6h19 structure (1 + 6 + 6/6) +1 os Assortment.
- GOST 26999-86 Manganese metal and manganese metal nitride. Methods of sampling and sample preparation for chemical and physico-chemical analyzes
- GOST 27041-86 Ferroalloys, metal chromium and manganese. Methods for determination of sulfur.
- GOST 27069-86 Ferroalloys, metal chromium and manganese. Methods for determination of carbon.
- GOST 27130-94 Ferrovanadium. Technical specifications and conditions of delivery
- GOST 2715-75 Metal screens wire. Types, basic parameters and dimensions.
- GOST 27208-87 castings of cast iron. Methods for mechanical testing.
- GOST 27265-87 welding wire of titanium and titanium alloys. specifications
- GOST 27266-87 Molybdenum wire for light sources. specifications
- GOST 27301-87 Cutting replaceable many-sided plates with hard-nose radius unilateral toroidal opening. The design and dimensions.
- GOST 27302-87 Plates cutting carbide replaceable many-sided chamfered at the top without holes. The design and dimensions.
- GOST 27333-87 Non-destructive testing. Measurement of electrical conductivity of nonferrous metals eddy current method.
- GOST 27387-87 Industrial robots for spot welding. Basic parameters and dimensions.
- GOST 27450-87 tubes of copper and copper-zinc alloys. Method for determination of contamination of the inner surface.
- GOST 27580-88 Arc welding of aluminum and aluminum alloys in an inert gas. Compounds welded at acute and obtuse angles. Main types, design elements and dimensions
- GOST 27611-88 Cast iron. photoelectric spectral analysis method.
- GOST 27674-88 Friction, wear and lubrication. Terms and Definitions
- GOST 2771-81 Wire round cold-drawn. assortment
- GOST 27772-88 Rental for construction steel structures. General specifications
- GOST 27776-88 Module manufacturing flexible arc welding and plasma treatment. Main settings.
- GOST 27809-95 iron and steel. Methods for spectrographic analysis.
- GOST 27861-88 Semi-finished products of non-ferrous metals and their alloys. Marking.
- GOST 2787-75 secondary ferrous metals. General specifications
- GOST 2789-73 surface roughness. Parameters and characteristics
- GOST 28033-89 steel. X-ray fluorescence analysis method.
- GOST 28058-89 Gold bullion. specifications
- GOST 28106-89 Copper cathodes. Sampling and preparation of samples and specimens for determining the specific electric resistance
- GOST 28277-89 Control of Non-Destructive. Joints. Elektroradiografichesky method. General requirements.
- GOST 283-75 Wire nails. Technical conditions.
- GOST 28332-89 Module manufacturing flexible arc welding. Norms of reliability and basic requirements for the control methods
- GOST 28334-89 Wire and steel cables for reinforcing prestressed concrete structures. Test method for relaxation under constant strain
- GOST 28370-89 Crossings prefabricated grades 1/11 and 1/9. Basic dimensions.
- GOST 28377-89 Powders for thermal spraying and welding. Types.
- GOST 28378-89 constructional powder materials based on iron. Brand.
- GOST 28393-89 rods and bars of high speed steel obtained by powder metallurgy. General specifications
- GOST 28394-89 compacted graphite iron for castings. stamps
- GOST 28426-90 Thermodiffusion hardening and protection of metal products. General requirements for technological process
- GOST 28473-90 iron, steel, ferrous alloys, chrome, manganese metal. General requirements for methods of analysis.
- GOST 285-69 Barbed monobasic corrugated. specifications
- GOST 28515-97 Copper. Method of test samples for the extension of the helix.
- GOST 28548-90 steel tubes. Terms and Definitions.
- GOST 28555-90 Fluxes ceramic arc welding of carbon and low alloy steels. General specifications
- GOST 2856-79 Magnesium alloys foundry. stamps
- GOST 28595-90 silver bullion. specifications
- GOST 28782-90 Ferroalloys. Experimental methods for checking the precision of sampling reduction.
- GOST 2879-2006 hot rolled steel for steel hexagon. assortment
- GOST 28800-90 metal pipes. Method for determination of moisture on the inner surface of pipes.
- GOST 28830-90 Connections solder. Test Methods Tensile and rupture strength.
- GOST 28831-90 Rolled plate. ultrasonic testing methods.
- GOST 28845-90 Machines for testing materials in creep rupture strength and relaxation. General specifications
- GOST 28868-90 metals and non-ferrous alloys. Measurement of hardness by indentation shock.
- GOST 28870-90 steel. Test Methods Tensile rolled plate in a thickness direction.
- GOST 28873-90 based alloys heavy non-ferrous metals, handled the pressure. unified brand
- GOST 28915-91 Welding laser pulse. Welded connection point. Main types, design elements and dimensions
- GOST 28920-95 Rotators welding roller. Types, basic parameters and dimensions.
- GOST 28944-91 Welding mechanical equipment. Test methods.
- GOST 29012-91 Powder metallurgy. Method for determining changes in the size compacts after removing the pressing pressure during sintering.
- GOST 29090-91 materials used in equipment for gas welding, cutting or similar process. General requirements
- GOST 29091-91 materials used in equipment for gas welding, cutting or similar process. General requirements
- Standard 29095-1 alloys powders and refractory, corrosion-resistant, nickel-based precision. Methods for the determination of iron.
- GOST 29117-91 Steel alloyed and high. Methods for determination of bismuth.
- GOST 29121-91 Carbon Steel wire ropes for elevators. specifications
- GOST 29273-92 weldability. definition
- GOST 29278-92 Powder Products. Structural elements. General requirements.
- GOST 29296-92 Extruded rectangular unequal T-section from aluminum and magnesium alloys. assortment
- GOST 29297-92 Welding, high-temperature and low-temperature brazing, braze welding of metals. List of conventions and processes
- GOST 29303-92 Extruded rectangular unequal I-section aluminum and magnesium alloys. assortment
- GOST 2936-75 Tubes flat-oval seamless radiator. specifications
- GOST 295-98 Aluminum for deoxidation, production of ferroalloys and aluminothermy. specifications
- GOST 297-80 contact Machinery. General specifications.
- GOST 2999-75 Metals and alloys. Method of measuring the Vickers hardness.
- GOST 30003-93 Metals. Bending test wound sheets and strips of less than 2.5 mm thick.
- GOST 30062-93 reinforcement rod for reinforced concrete structures. Eddy current inspection method strength characteristics
- GOST 30136-94 Rolled carbon steel of ordinary quality. specifications
- GOST 30220-95 Manipulators for contact spot welding. Types, basic parameters and dimensions.
- GOST 30237-96 finishing axes for railway rolling stock of 1520 mm. specifications
- GOST 30242-97 defects in welding metal compounds melting. The classification, designation and determination
- GOST 30245-2003 Steel bent profile closed welded square and rectangular for building structures. specifications
- GOST 30246-94 Rolled sheet roll with protective and decorative coatings for building structures. specifications
- GOST 30260-96 Equipment for surfacing surfaces of bodies of rotation. Types, basic parameters and dimensions.
- GOST 30261-96 Equipment for welding of girth welds. Types, basic parameters and dimensions
- GOST 30272-96 axes rough (blank profile) for railway rolling stock of 1520 mm. General specifications
- GOST 30275-96 Manipulators for contact spot welding. General specifications.
- GOST 30295-96 Tilters welding. Types, basic parameters and dimensions.
- GOST 30311-96 Titanium sponge. Method for determination of Brinell hardness.
- GOST 304-82 welding generators. General specifications.
- GOST 30415-96 steel. Non-destructive control of mechanical properties and microstructures of magnetic metal method.
- GOST 30430-96 Welding arc structural iron. Process Requirements
- GOST 30432-96 metal pipes. Sampling methods, blanks and samples for mechanical and technological tests.
- GOST 30456-97 Metal. Rolled sheet and steel pipes. test methods for impact bending.
- GOST 30482-97 Welding of electro-steel. Process Requirements
- Pipes GOST 30563-98 seamless cold carbon and alloy steels with special properties. specifications
- Pipes GOST 30564-98 seamless hot carbon and alloy steels with special properties. specifications
- GOST 30565-98 steel profiles, hot-rolled special chemical and petroleum engineering. General specifications
- GOST 3062-80 single rope stranding type LK-O construction 1x7 (1 + 6). Assortment.
- GOST 30620-98 aluminum alloys for the production of pistons. Technical conditions.
- GOST 3063-80 single rope stranding TK 1h19 structure (1 + 6 + 12). Assortment.
- GOST 3064-80 single rope stranding TK 1h37 structure (1 + 6 + 12 + 18). Assortment.
- GOST 30649-99-based alloys, precious metal jewelry. stamps
- GOST 3066-80 double lay rope type LK-O 6x7 construction (1 + 6) + 1h7 (1 + 6). Assortment.
- GOST 3067-88 steel rope double stranding 6h19 TK type structure (1 + 6 + 12) + 1h19 (1 + 6 + 12). Assortment.
- GOST 3068-88 steel rope double stranding 6h37 TK type structure (1 + 6 + 12 + 18) + 1h37 (1 + 6 + 12 + 18). Assortment.
- GOST 3069-80 double lay rope type LK-O 6x7 construction (1 + 6) 1 os Assortment.
- GOST 3070-88 steel rope double stranding 6h19 TK type structure (1 + 6 + 12) +1 os Assortment.
- GOST 3071-88 steel rope double stranding 6h37 TK type structure (1 + 6 + 12 + 18) +1 os Assortment.
- GOST 30756-2001 Fluxes for electroslag technologies. General specifications
- GOST 3077-80 double lay rope type LK-O 6h19 construction (1 + 9 + 9) +1 os Assortment.
- GOST 3079-80 double rope stranding type TLK-O 6h37 structure (1 + 6 + 15 + 15) +1 os Assortment.
- GOST 3081-80 double lay rope type LK-O 6h19 construction (1 + 9 + 9) + 7x7 (1 + 6). Assortment.
- GOST 30829-2002 Acetylene generator mobile. General specifications.
- GOST 3083-80 double lay rope type LK-O structure 6x30 (0 + 15 + 15) +7 os Assortment.
- GOST 3085-80 double rope stranding trehgrannopryadny 6x30 construction (6 + 12 + 12) +1 os Assortment.
- GOST 3088-80 double rope stranding mnogopryadny type LK-R 18h19 structure (1 + 6 + 6/6) +1 os Assortment.
- GOST 3089-80 rope stranding triple type LK-R 6h7h19 structure (1 + 6 + 6/6) +1 os Assortment.
- GOST 3090-73 Steel ropes. Rope indoor carrying one layer zetobraznoy wire and TK-type core. Assortment.
- GOST 3091-80 rope 8h4h7 flat structure (1 + 6). Assortment.
- GOST 3092-80 rope flat design 8h4h9 (0 + 9) +32 os Assortment.
- GOST 3093-80 ropes double stranding type LK-O 3x7 construction (1 + 6), the design type TC 3h27 (3 + 9 + 15), TK 3h37 structure (1 + 6 + 12 + 18). Assortment.
- GOST 3097-80 double lay ropes TK construction 8x16 (0 + 5 + 11) +9 os, type LK-O 8x6 structure (6 + 0) 9 os Assortment.
- GOST 3110-74 steel wire spoke. specifications
- GOST 3120-75 Steel rope for aircraft. pre-drawing method.
- GOST 31334-2007 axles of railway rolling stock of 1520 mm. Technical conditions.
- GOST 31366-2008 Brass bars for machining on automatic. specifications
- 3183-1-2007 Standard steel pipe for pipelines. Technical conditions. Part 1: Requirements for pipes class A.
- 3183-2-2007 Standard steel pipe for pipelines. Technical conditions. Part 2: Requirements for pipes class B.
- 3183-3-2007 Standard steel pipe for pipelines. Technical conditions. Part 3. Requirements for pipes class C.
- GOST 3187-76 Filter wire gauze. specifications
- GOST 3193-74 Grids catalyst of platinum alloys. Technical conditions.
- GOST 3212-92 model kits. The slopes forming, rod signs, dimensional tolerances
- GOST 3241-91 Steel ropes. Technical conditions.
- GOST 3242-79 joints. Methods of quality control
- GOST 3248-81 Metals. Test method for creep.
- GOST 3262-75 steel tubes for water. specifications
- GOST 3280-84 Linings of spike fastening the railway track. Technical conditions.
- GOST 3282-74 steel wire Low-carbon general purpose. specifications
- GOST 3306-88 with square mesh netting of corrugated steel wire. specifications
- GOST 3339-74 wire gauze (achene). specifications
- GOST 3443-87 castings from cast iron with various forms of graphite. Methods of structure determination.
- GOST 3559-75 Steel belts for armouring cables. specifications
- GOST 3560-73 steel tape packaging. specifications
- GOST 3565-80 Metals. Test Method for Torsion.
- GOST 3640-94 Zinc. specifications
- Pipes GOST 3728-78. Test Method for bend.
- GOST 3778-98 Lead. specifications
- GOST 380-2005 Common quality carbon steel. stamps
- GOST 3822-79 bimetallic steel-copper wire. specifications
- GOST 3826-82 wire gauze with square cells. specifications
- GOST 3836-83 Rolled steel and unalloyed electrical tape. specifications
- GOST 3845-75 metal pipes. Test method of hydraulic pressure.
- GOST 3875-83 steel wire carded. specifications
- GOST 3882-74 Firm alloys sintered. stamps
- GOST 3920-70 steel wire tin-plated cable. specifications
- GOST 4004-64 ingots aluminum wire.
- GOST 4028-63 Construction nail. The design and dimensions.
- GOST 4029-63 Roofing felt nails round. The design and dimensions.
- GOST 4030-63 roofing nails. The design and dimensions.
- GOST 4032-63 Nails finishing round. The design and dimensions.
- GOST 4033-63 wallpaper coating Nails round. The design and dimensions.
- GOST 4034-63 Nails tare round. The design and dimensions.
- GOST 4035-63 Molding Nails round. The design and dimensions.
- GOST 4041-71 Rolled sheet for cold forming of structural quality steel. specifications
- GOST 4121-96 Crane rails. specifications
- GOST 4133-73 Covers rail-headed for wide gauge railways. Technical requirements.
- GOST 4134-75 Profiles of copper alloys for collectors of electrical machines. specifications
- GOST 434-78 Rectangular wire and copper bars for electrical purposes. specifications
- GOST 4405-75 Hot-rolled steel strips and forged tool. assortment
- GOST 4411-79 products carbide for mining tools. Technical conditions.
- GOST 4417-75 Sand of quartz for welding materials.
- GOST 4421-73 hydrofluoric concentrate for welding materials. specifications
- GOST 4442-72 Tapes and strips of lead brass. specifications
- GOST 4515-93 Alloys copper-phosphorous. specifications
- GOST 4529-78 Reagents. Zinc chloride. Technical conditions.
- GOST 4543-71 Rolled doping structural steel. specifications
- GOST 4658-73 Mercury. Technical conditions.
- GOST 4727-83 Wire Bearing. specifications
- GOST 4748-92 Strips and tapes of the siliceous-manganese bronze. specifications
- GOST 4752-79 Copper wire kreshernaya. specifications
- GOST 4755-91 ferromanganese. Technical specifications and conditions of delivery
- GOST 4756-91 Ferrosilicomanganese. Technical specifications and conditions of delivery
- GOST 4757-91 Ferrochrome. Technical specifications and conditions of delivery
- GOST 4759-91 Ferro. Technical specifications and conditions of delivery
- GOST 4761-91 Ferrotitanium. Technical specifications and conditions of delivery
- GOST 4762-71 Silicocalcium. specifications
- GOST 4781-85 Hot-rolled steel profiles for sheet piles. specifications
- GOST 4784-97 Aluminum and aluminum wrought alloys. stamps
- GOST 4832-95 Foundry iron. specifications
- GOST 4872-75 products for a cutting tool of hard sintered alloys. Technical conditions.
- GOST 492-2006 Nickel, nickel alloys, and copper-nickel alloys processed pressure. stamps
- GOST 493-79 Tinless foundry bronze. stamps
- Pipes GOST 494-90 brass. specifications
- GOST 495-92 Sheets and copper strips. specifications
- GOST 4960-75 electrolytic copper powder. Technical conditions.
- GOST 4986-79 Tape cold-rolled corrosion-resistant and heat-resistant steel. specifications
- GOST 5.1215-72 Metallic electrodes brand ANO-4 for arc welding of low-carbon structural steels. Quality requirements for certified products
- GOST 5.917-71 Burners manual TIG welding type 150-WGA and DSA-400. Quality requirements for certified products
- GOST 5000-83 Rough drafts for cars and tenders of railways of 1520 mm. Dimensions.
- GOST 5005-82 steel tubes for cold-driveshafts. specifications
- GOST 5017-2006 Bronze pewter, handled the pressure. stamps
- GOST 503-81 Tape cold-rolled mild steel. specifications
- GOST 5063-73 Strips of copper-nickel alloys. specifications
- GOST 5157-83 hot rolled steel profiles different purposes. assortment
- GOST 5187-2003 Tapes from the German silver, nickel silver and Monel. specifications
- GOST 5189-75 Tape constantan. specifications
- GOST 5191-79 injection Cutters for manual oxygen cutting. Types, basic parameters and general technical requirements
- GOST 5210-95 quality rolled products of tool steel for files, rasps, chisels and kreytsmeyseley. General specifications
- GOST 5220-78 Nickel silver wire. specifications
- GOST 5221-2008 Wire of tin-zinc bronze. specifications
- GOST 5222-72 Wire kremnemargantsovoy bronze. specifications
- GOST 5257-89 Bandages rough carbon steel for rolling stock rail. Technical conditions.
- GOST 5264-80 Manual arc welding. Joints. Main types, design elements and dimensions
- GOST 5267.0-90 Hot-rolled profiles for car building. General specifications
- GOST 5267.1-90 Channel bars. assortment
- GOST 5267.3-90 profile for Zeta sill. assortment
- GOST 5272-68 Corrosion metals. Terms.
- GOST 529-78 radiator tubes. specifications
- GOST 5307-77 constantan wire uninsulated. specifications
- GOST 5336-80 Grid steel wicker single. Technical conditions.
- 535-2005 Standard roll stock and the forming of the carbon steel of ordinary quality. General specifications
- GOST 5362-78 Brass Bands. specifications
- GOST 5422-73 Hot-rolled steel profiles for tractors. specifications
- GOST 5426-76 Dies billet from hard sintered alloys for drawing hexagonal rods. Shapes and sizes.
- GOST 5437-85 Wire berdnaya. specifications
- GOST 546-2001 Copper cathodes. specifications
- GOST 5468-88 Wire needle. specifications
- GOST 5494-95 Aluminum pigmentary powder. Technical conditions.
- GOST 5497-80 Tape cold-rolled steel for saw ginning machines. specifications
- GOST 550-75 Seamless steel pipes for the oil refining and petrochemical industries. specifications
- GOST 5520-79 Rolled sheet made of carbon and low alloyed steel alloy for boilers and vessels operating under pressure. specifications
- GOST 5521-93 Rolled steel for shipbuilding. specifications
- GOST 5525-88 iron connecting parts manufactured by casting in sand molds for pipes. Technical conditions.
- GOST 5529-75 Wire brass round for the footwear industry. specifications
- GOST 5582-75 Rolled sheet of corrosion-resistant, heat-resistant and heat-resistant. specifications
- GOST 5614-74 Machines for thermal cutting metals. Types, basic parameters and dimensions
- GOST 5632-72 highly alloyed steels and alloys corrosion-resistant, heat-resistant and heat-resistant. stamps
- GOST 5638-75 Copper Foil Roll for technical purposes. specifications
- GOST 5639-82 steels and alloys. Methods for detection and determination of grain size.
- GOST 5640-68 steel. Metallographic evaluation method microstructure sheets and tapes.
- GOST 5654-76 Pipes steel seamless hot for shipbuilding. specifications
- GOST 5657-69 steel. Test method for hardenability.
- GOST 5663-79 steel wire for cold heading carbon. specifications
- GOST 5781-82 Hot-rolled steel for reinforcement of concrete structures. specifications
- GOST 5812-82 bones for broad gauge railways. Technical conditions.
- GOST 5876-82 narrow gauge railway rails type P18 and P24. Technical requirements
- GOST 5905-2004 Metallic chrome. Technical specifications and conditions of delivery
- GOST 5949-75 and calibrated steel for corrosion-resistant, heat-resistant and heat-resistant. specifications
- GOST 5950-2000 rods, strips of tool alloy steel coils. General specifications
- GOST 598-90 zinc sheets of general purpose. specifications
- GOST 6008-90 Metallic manganese and manganese nitride. specifications
- GOST 6009-74 Tapes steel hot-rolled. specifications
- GOST 6012-98 Nickel. Methods of chemical-atomic-emission spectral analysis.
- GOST 6032-2003 steels and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
- GOST 613-79 Tin foundry bronzes. stamps
- GOST 6130-71 Metals. Methods for determination of heat resistance.
- GOST 614-97 Casting bronzes in pigs. specifications
- GOST 6143-78 Harvesting axis for trams. specifications
- GOST 617-2006 Pipes made of copper and circular cross-section of general purpose. specifications
- GOST 618-73 Aluminum foil for technical purposes. specifications
- GOST 6235-91 Sheets and nickel strip. specifications
- GOST 6238-77 Casings and core barrels for geological exploration drilling and nipples to them.
- GOST 631-75 Drill pipes with upset ends and couplings. specifications
- GOST 632-80 Casing pipes and couplings. specifications
- GOST 633-80 Tubing pipes and couplings. specifications
- GOST 6368-82 narrow gauge railway rails types P8, P11, P18 and P24. Design and dimensions
- GOST 6511-60 Bars tin-zinc bronze. specifications
- GOST 6563-75 technical articles made of precious metals and alloys. Technical conditions.
- GOST 6613-86 wire gauze with square cells. Technical conditions.
- GOST 6688-91 Brass bars of rectangular cross section. specifications
- GOST 6713-91 Rolled low-alloy structural for bridge construction. specifications
- GOST 6727-80 Wire from low-carbon steel cold-drawn for reinforcing concrete structures. specifications
- GOST 6750-75 Copper Nails for shipbuilding. Technical conditions.
- GOST 6765-75 three-layer hot-rolled steel sheet and broadband (universal). specifications
- GOST 6835-2002 Gold and its alloys. Brand.
- GOST 6836-2002 Silver and its alloys. stamps
- GOST 6856-54 steel pipes special profiles.
- GOST 6902-75 Gold and silver leaf. Technical conditions.
- GOST 6942-98 Iron sewer pipes and shaped parts to them. specifications
- GOST 6981-94 Iron vitriol technical. Technical conditions.
- GOST 6996-66 Welded joints. Methods for determination of mechanical properties.
- GOST 7056-77 Linings of spike fastening for rails type P43. The design and dimensions.
- GOST 7062-90 forgings made of carbon steel and alloy steel. manufactured by forging presses. Allowances and tolerances
- GOST 7122-81 weld seams and weld metal. Sampling methods for determining the chemical composition.
- GOST 7173-54 Rails P43 type for industrial vehicles tract. Design and dimensions
- GOST 7174-75 Rails P50. Design and dimensions
- GOST 7221-80 bands of gold, silver and their alloys. specifications
- GOST 7222-75 Wire made of gold, silver and their alloys. specifications
- GOST 7237-82 Converters for welding. General specifications.
- GOST 7268-82 steel. Method for determination of propensity to mechanical aging test for the impact strength.
- GOST 7293-85 Ductile iron castings. stamps
- GOST 7347-94 Ferroalloys. Experimental methods for the control of systematic errors of sampling and sample preparation.
- GOST 7348-81 carbon steel wire for reinforcement of prestressed concrete structures. specifications
- GOST 7350-77 Rolled steel, corrosion-resistant, heat-resistant and heat-resistant. specifications
- GOST 7370-98 Crossings rail type P75, P65 and P50. Technical conditions.
- GOST 7372-79 steel wire rope. specifications
- GOST 7417-75 calibrated round steel. assortment
- GOST 7419-90 Hot-rolled steel for springs. assortment
- GOST 7480-73 Wire printing. specifications
- GOST 7505-89 Forgings steel, stamped. Tolerances, allowances and forging laps
- GOST 7511-73 steel profiles for windows and lamp casements and window panels industrial buildings.
- GOST 7512-82 Non-destructive testing. Joints. Radiographic method.
- GOST 7524-89 Spheres steel grinding for ball mills. specifications
- GOST 7564-97 Rental. General rules of sampling, blanks and samples for mechanical and technological tests.
- GOST 7565-81 iron, steel and alloys. Sampling method for determination of chemical composition.
- GOST 7566-94 Metal. Acceptance, marking, packaging, transportation and storage.
- GOST 7665-80 double lay rope type LK-3 6h25 structure (1 + 6 6 + 12) 1 os Assortment.
- GOST 7667-80 double lay rope type LK-3 6h25 structure (1 + 6 6 + 12) + 7x7 (1 + 6). Assortment.
- GOST 7668-80 double lay rope type LK-PO 6h36 construction (1 + 7 + 7/7 + 14) +1 os Assortment.
- GOST 7669-80 double lay rope type LK-PO 6h36 construction (1 + 7 + 7/7 + 14) + 7x7 (1 + 6). Assortment.
- GOST 767-91 Copper anodes. specifications
- GOST 7675-73 Steel ropes. Rope indoor carrier with one layer and one layer of the wedge wire and zetobraznoy TK-type core. Assortment.
- GOST 7676-73 Steel ropes. Rope indoor carrier with two layers, one layer of the wedge wire and zetobraznoy TK-type core. Assortment.
- GOST 7681-80 double rope stranding mnogopryadny type LK-O 18h7 structure (1 + 6) 1 os Assortment.
- GOST 7769-82 alloying iron for castings with special properties. stamps
- GOST 7829-70 forgings made of carbon and alloy steel, manufactured by forging on hammers. Allowances and tolerances
- GOST 7871-75 wire welding of aluminum and aluminum alloys. specifications
- GOST 7909-56 Pipes boring for geological survey and couplings. specifications
- GOST 792-67 quality low carbon wire. specifications
- Pipes GOST 800-78 bearing. specifications
- Bearing Steel GOST 801-78. specifications
- GOST 803-81 Hot Rolled strip for cladding of quality carbon steel and stainless steel. specifications
- GOST 8036-79 Tape Tompakova. specifications
- GOST 804-93 Primary magnesium ingots. specifications
- GOST 805-95 Pig iron. specifications
- GOST 808-70 Steel belts for flattened twisted roller bearing. specifications
- GOST 8141-56 Rail fastening for narrow gauge railways. Lining. General specifications.
- GOST 8142-89 pads for rails type P18, P24, P33. Technical conditions.
- GOST 8193-73 pads to the rails-headed types P65 and P75. The design and dimensions.
- GOST 8194-75 Linings of spike fastening for railway rails type P65 and P75. The design and dimensions.
- GOST 82-70 Hot-rolled steel universal broadband. assortment
- GOST 8213-75 Machines for arc welding with consumable electrode. General specifications.
- GOST 8233-56 steel. Standards microstructure.
- GOST 8239-89 I-beam hot-rolled steel. assortment
- GOST 8240-97 Hot-rolled channel steel. assortment
- GOST 8278-83, equilateral channel steel bent. assortment
- GOST 8281-80 Steel bent Channel bars unequally. assortment
- GOST 8282-83 steel profiles bent C-shaped equilateral. assortment
- GOST 8283-93 Steel bent profile Korytny equilateral. assortment
- GOST 8319.0-75 hot rolled steel profiles periodic longitudinal rolling. Technical conditions.
- GOST 8320.0-83 profiles periodic helical rolling. General specifications.
- GOST 839-80 Non-insulated wires for overhead power lines. specifications
- GOST 8467-83 steel pipes drilling nipple connections for exploration drilling. specifications
- GOST 8478-81 Welded nets for concrete reinforcement. Technical conditions.
- GOST 8479-70 Forgings from structural carbon steel and alloy steel. General specifications
- GOST 849-2008 Primary nickel. specifications
- GOST 8509-93 Hot-rolled angle equilateral. assortment
- GOST 8510-86 Hot-rolled angle unequal. assortment
- GOST 8559-75 steel square calibrated. assortment
- GOST 8560-78 Sized rolled hex. assortment
- GOST 8568-77 Sheet metal with rhombic and lentil corrugation. specifications
- GOST 859-2001 Copper. stamps
- GOST 860-75 Tin. specifications
- GOST 8617-81 Extruded aluminum and aluminum alloys. specifications
- GOST 8638-57 steel tubes teardrop. assortment
- GOST 8639-82 Pipes steel square. assortment
- GOST 8642-68 steel tubes oval. assortment
- GOST 8644-68 steel flat-oval tubes. assortment
- GOST 8645-68 steel rectangular pipes. assortment
- GOST 8646-68 steel pipes with hollow ribs. assortment
- GOST 8693-80 metal pipes. Test method for flanging.
- Pipes GOST 8694-75. Test method for distribution.
- Pipes GOST 8695-75. Test Method for flattening.
- GOST 8696-74 electrowelded steel pipes with spiral seam general purpose. specifications
- GOST 8713-79 Submerged arc welding. welded connections. Main types, design elements and dimensions
- GOST 8731-87 Pipes steel seamless hot. Technical requirements
- GOST 8732-78 Pipes steel seamless hot. assortment
- GOST 8733-74 Pipes steel seamless cold and teplodeformirovannye. Technical requirements
- GOST 8734-75 Pipes steel seamless cold. assortment
- GOST 8774-75 Li. Technical conditions.
- GOST 8776-99 Cobalt. Methods of chemical-atomic-emission spectral analysis.
- GOST 8786-68 steel dowels for chistotyanutaya segment. Assortment.
- GOST 8787-68 Steel chistotyanutaya for dowels. assortment
- GOST 880-75 products carbide for mining tools. Shapes and sizes.
- GOST 8803-89 round wire of precision alloys with high electrical resistance for the finest resistive elements. specifications
- GOST 8817-82 Metals. Method for testing the draft.
- GOST 8818-73 Metals. Test method for flattening.
- GOST 8851-75 Tape made of steel grades and 11kp 11YUA. specifications
- GOST 8856-72 Equipment for gas-flame processing. Pressure combustible gases.
- GOST 89-73 lead roles. Technical conditions.
- GOST 8943-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Nomenclature.
- GOST 8944-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Technical requirements.
- GOST 8946-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Squares communicating. Basic dimensions.
- GOST 8948-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Tees straight. Basic dimensions.
- GOST 8949-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Tee. Basic dimensions.
- GOST 8950-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Tees with two transitions. Basic dimensions.
- GOST 8951-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Crosses straight. Basic dimensions.
- GOST 8952-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Crosses transition. Basic dimensions.
- GOST 8953-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Crosses with two transitions. Basic dimensions.
- GOST 8954-75 connecting portions of ductile iron with a cylindrical thread for pipelines. straight short sleeve. Basic dimensions.
- GOST 8955-75 connecting portions of ductile iron with a cylindrical thread for pipelines. long straight coupling. Basic dimensions.
- GOST 8956-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Expansion joints. Basic dimensions.
- GOST 8957-75 connecting portions of ductile iron with a cylindrical thread for pipelines. nipples. Basic dimensions.
- GOST 8958-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Nipples double. Basic dimensions.
- GOST 8959-75 connecting portions of ductile iron with a cylindrical thread for pipelines. union nuts. Basic dimensions.
- GOST 8960-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Fittings. Basic dimensions.
- GOST 8961-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Locknuts. Basic dimensions.
- GOST 8962-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Caps. Basic dimensions.
- GOST 8963-75 connecting portions of ductile iron with a cylindrical thread for pipelines. Traffic jams. Basic dimensions.
- GOST 8965-75 steel connections with cylindrical thread for pipelines P = 1.6 MPa. Technical conditions.
- GOST 8966-75 steel connections with cylindrical thread for pipelines P = 1.6 MPa. direct coupling. main dimensions
- GOST 8967-75 steel connections with cylindrical thread for pipelines P = 1.6 MPa. Nipples. Basic dimensions.
- GOST 8968-75 steel connections with cylindrical thread for pipelines P = 1.6 MPa. Locknuts. Basic dimensions.
- GOST 9.005-72 Unified system of corrosion and aging. Metals, alloys, metallic and non-metallic inorganic coating. Admissible and inadmissible contact with metals and nonmetals
- GOST 9.019-74 Unified system of corrosion and aging. Alloys of aluminum and magnesium. Methods of accelerated tests for corrosion cracking
- GOST 9.021-74 Unified system of corrosion and aging. Aluminum and aluminum alloys. Methods of accelerated tests on the intergranular corrosion
- GOST 9.039-74 Unified system of corrosion and aging. Corrosiveness atmosphere.
- GOST 9.040-74 Unified system of corrosion and aging. Metals and alloys. Calculation and experimental method of accelerated corrosion loss determination in atmospheric conditions
- GOST 9.316-2006 Unified system of corrosion and aging. Thermodiffusion zinc coating. General requirements and methods of control.
- GOST 9.517-2003 Unified system of corrosion and aging. Temporary corrosion protection products. Test methods.
- GOST 9.901.1-89 Unified system of corrosion and aging. Metals and alloys. General requirements for test methods for stress corrosion cracking
- GOST 9.901.3-2007 Unified system of corrosion and aging. Metals and alloys. General requirements for the use of the U-shaped specimens for stress-corrosion cracking test
- GOST 9.901.4-89 Unified system of corrosion and aging. Metals and alloys. Tests on corrosion cracking specimens under uniaxial tension.
- GOST 9.903-81 Unified system of corrosion and aging. Steel and high-strength alloys. Methods of accelerated tests for corrosion cracking.
- GOST 9.904-82 Unified system of corrosion and aging. Alloys of aluminum. Method of accelerated tests for exfoliation corrosion.
- GOST 9.905-2007 Unified system of corrosion and aging. Methods for corrosion testing. General requirements.
- GOST 9.907-2007 Unified system of corrosion and aging. Metals, alloys, metal coating. Methods for removing corrosion products after the corrosion test
- GOST 9.908-85 Unified system of corrosion and aging. Metals and alloys. Methods for determining the corrosion rates, and corrosion resistance.
- GOST 9.909-86 Unified system of corrosion and aging. Metals, alloys, metal coatings and non-metallic inorganic. Test methods for climatic testing stations
- GOST 9.911-89 Unified system of corrosion and aging. Steel weatherproof. Method of accelerated corrosion tests
- GOST 9.912-89 Unified system of corrosion and aging. Steel and corrosion resistant alloys. Methods for accelerated tests of resistance to pitting
- GOST 9.913-90 Unified system of corrosion and aging. Aluminum, magnesium and their alloys. Methods of accelerated corrosion tests
- GOST 9.914-91 Unified system of corrosion and aging. Corrosion-resistant austenitic steel. Electrochemical methods for determining the resistance to intergranular corrosion
- GOST 9012-59 Metals. Method for measuring Brinell hardness.
- GOST 9013-59 Metals. Method of measurement of hardness of Rockwell.
- GOST 9045-93 Rolled sheet of low carbon cold-quality steel for cold forging. specifications
- GOST 9074-85 Nets slot on the connecting pin. Technical conditions.
- GOST 9087-81 welding fluxes. specifications
- GOST 9124-85 steel wire tinned bandage. specifications
- GOST 9161-85 Wire Harness. specifications
- GOST 9234-74 Steel bent profile sheets with trapezoidal corrugation. assortment
- GOST 9235-76 Hot-bulb sections for shipbuilding symmetrical. assortment
- GOST 931-90 Sheets and brass bands. specifications
- GOST 9389-75 steel wire Carbon spring. specifications
- GOST 9450-76 Measurement of microhardness indentation diamond tips.
- GOST 9453-75 Dies billet from hard sintered alloys for the wire drawing and the bars of circular cross section.
- GOST 9454-78 Metals. Method for testing the impact strength at low, room and elevated temperatures.
- GOST 9466-75 Covered electrodes for manual arc welding of steels and surfacing. Classification and general technical conditions
- GOST 9467-75 Covered electrodes for manual arc welding of structural and heat-resistant steels. types
- GOST 949-73 steel cylinders of small and medium volume for gases to Pp = 19.6 MPa (200 kgf / cm sq.). Technical conditions.
- GOST 9498-79 ingots of aluminum and aluminum alloys deformable flat for rolling. specifications
- GOST 9559-89 Sheets of lead. specifications
- GOST 9567-75 precision steel tubes. assortment
- GOST 9583-75 cast iron pipes, pressure hoses, made by centrifugal casting and semi-continuous. specifications
- GOST 9651-84 Metals. Method for testing the impact strength at low, room and elevated temperatures.
- GOST 9721-79 cobalt powder. Technical conditions.
- GOST 9722-97 Nickel Powder. Technical conditions.
- GOST 9723-73 powder tin. Technical conditions.
- GOST 9731-79 seamless steel cylinders large volume = 24.5 MPa (250 kgf / cm sq.) Pp for gases. Technical conditions.
- GOST 977-88 Steel Castings. General specifications
- GOST 9797-85 Rails kontrrelsovye RK50. dimensions
- GOST 9798-85 Rails kontrrelsovye RK65. dimensions
- GOST 9849-86 iron powder. Technical conditions.
- GOST 9850-72 steel wire, galvanized wire for cores. specifications
- GOST 9870-61 Wire nails galvanized for asbestos-cement roofing. Technical conditions.
- Pipes GOST 9940-81 seamless hot-corrosion-resistant steel. specifications
- GOST 9941-81 seamless pipes and cold teplodeformirovannye of corrosion-resistant steel. specifications
- GOST 9960-85 Ostryakova rails. specifications
- GOST 50065-92 Ferro. Experimental methods for evaluation of the quality variation and methods for controlling the sampling accuracy.
- GOST 50066-92 Extruded rectangular unequal channel section from aluminum and magnesium alloys. assortment
- GOST 50067-92 Extruded rectangular cross section of unequal Zeta aluminum and magnesium alloys. assortment
- GOST 50077-92 Extruded oblique angular sections from aluminum and magnesium alloys. assortment
- GOST 50278-92 Drill pipes welded with locks. specifications
- GOST 50379-92 tightness of equipment and devices for gas welding, cutting or similar process. Acceptable speed external leakage of gas and the method of their measurement
- GOST 50402-92 safety devices for flammable gases and oxygen or compressed air used for gas welding, cutting and similar processes. Basic concepts, general requirements and test methods
- GOST 50424-92 Steel and iron. Method for determination of calcium.
- GOST 50542-93 Ferrous metals for the top structure of track. Terms and Definitions
- GOST 50566-93 steel wire for mechanical springs. General requirements
- GOST 50567-93 steel wire for mechanical springs cold drawn carbon steel.
- GOST 50575-93 Welding. the zinc coating to the requirements and test methods for coating.
- GOST 50630-93 Bismuth-207, Cadmium-109, cobalt-57 cyclotron. stamps
- GOST 50664-94 Ultrasonic technology. Operating frequencies.
- GOST 50708-94 wire. Method of test for alternating torsion.
- GOST 50724.1-94 Ferro. Materials. Terms and Definitions.
- GOST 50724.2-94 Ferro. Selection and preparation of samples. Terms and Definitions.
- GOST 50724.3-94 Ferro. Sieve analysis. Terms and Definitions.
- GOST 50865-96 rails. Test method for corrosion-fatigue life.
- GOST 51013-97 heat-resistant alloys, corrosion-resistant, nickel-based precision. Methods for determination of titanium.
- GOST 51045-97 Rails types RP50, RP65 and RP75 to industrial railway transport paths. General specifications.
- GOST 51056-97 and high alloyed steels. Atomic emission spectroscopic method of determining tungsten and molybdenum
- GOST 51164-98 Steel Pipelines. General requirements for corrosion protection.
- GOST 51245-99 Drill pipes steel universal. General specifications
- GOST 51285-99 Filter wire twisted with hexagonal cells for gabion structures. Technical conditions.
- GOST 51381-99 blanks of corrosion resistant alloys based on cobalt for prosthetic dentistry. General specifications
- GOST 51393-99 Rolled sheet and cold-formed sections of stainless steel for carriage. specifications
- GOST 51394-99 rolled products of stainless steel for surgical implants. specifications
- GOST 51395-99 Rods cast from alloy HK62M6L for artificial joints. specifications
- GOST 51396-99 special alloy wire for connecting the power elements and implantable articles for bone body. General specifications
- GOST 51397-99 tape and wires made of special alloys for the connecting elements and implantable articles for cardiovascular surgery. General specifications
- GOST 51510-99 exploration drilling pipes. Types and basic dimensions
- GOST 51568-99 sieves of metal wire mesh. Technical conditions.
- GOST R 51572-2000 Gold Ingots dimensional. Technical conditions.
- GOST P 51573-2000 alloyed brass pipes for heat exchangers. specifications
- GOST P 51682-2000 Casings and core for geological exploration drilling. specifications
- GOST P 51685-2000 Railway rails. General specifications
- GOST P 51704-2001 Ingots measuring platinum. Technical conditions.
- GOST R 51713-2001 Ingots ferrous and non-ferrous metals. Acceptable levels of specific activity of gamma-emitting radionuclides. radiation monitoring method.
- GOST P 51753-2001 high pressure cylinders for compressed natural gas used as a fuel for automotive vehicles. General specifications
- GOST P 51767-2001 blanks of nickel-based alloys for prosthetic dentistry. General specifications
- GOST P 51776-2001 double coring tubes for geological exploration drilling. Types and main parameters
- GOST P 51784-2001 Ingots measuring silver. specifications
- GOST P 51834-2001 Rods extruded aluminum alloy of high strength and increased ductility. specifications
- GOST R 52005-2003 Non-destructive testing. The method of the magnetic memory metal. General requirements.
- GOST P 52079-2003 welded steel pipes for trunk pipelines, oil pipelines and oil pipelines. specifications
- GOST R 52132-2003 Articles from the grid for gabion structures. Technical conditions.
- GOST R 52145-2003 Materials composite on the basis of aluminum foil. specifications
- GOST P 52146-2003 Rolled sheet cold-rolled and cold-rolled hot dip coated with continuous lines. specifications
- GOST R 52203-2004 Tubing pipes and couplings. specifications
- GOST R 52204-2004 Tin cold black and white. specifications
- GOST P 52222-2004 welding fluxes for automatic welding. specifications
- GOST P 52246-2004 Rolled sheet galvanized. specifications
- GOST P 52318-2005 copper pipes of circular cross section for water and gas. specifications
- GOST R 52366-2005 Rough drafts for railways broad gauge locomotives. Types and sizes.
- GOST R 52544-2006 rental reinforcing welded periodic profile for reinforcement of concrete structures. specifications
- GOST 52568-2006 Steel pipes with outer protective coating for the main oil and gas pipelines. specifications
- GOST P 52597-2006 brass rods for machining on machines. specifications
- GOST R 52727-2007 Technical diagnostics. Acoustic-emission diagnostics. General requirements.
- GOST R 52731-2007 Non-destructive testing. Acoustic stress control method. General requirements.
- GOST R 52764-2007 metallic materials. The test method for bend sheets and tapes of 3 mm or less.
- GOST P 52793-2007 precious metals. Terms and Definitions.
- GOST P 52802-2007 heat resisting nickel alloys granulated. Brand.
- GOST R 52890-2007 Non-destructive testing. Acoustic voltage control method in the pipe material. General requirements
- GOST P 52891-2007 process control of residual stress by laser interferometry. General requirements
- GOST P 52922-2008 fittings of copper and copper alloys for connection of copper pipes capillary soldering method. Technical conditions.
- GOST P 52927-2008 Rolled steel for shipbuilding normal, high, and high strength. specifications
- GOST P 52948-2008 fittings of copper and copper alloys for connection of copper pipes pressing method. Technical conditions.
- GOST P 52949-2008-adapter fittings of copper and copper alloys to connect pipes. Technical conditions.
- GOST P 52955-2008 solders for soldering capillary fittings of copper and copper alloys for joining pipe systems. Brand.
- GOST R 53204-2008 Non-destructive testing. Acoustic method for controlling stress variables. General requirements
- GOST P ISO 10124-99 seamless steel tubes for pressure and welded (except tubes made by submerged arc welding). Bundles ultrasonic inspection method
- GOST P ISO 10332-99 seamless steel tubes for pressure and welded (except tubes made by submerged arc welding). Ultrasonic continuity inspection method.